We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Multicoloured braided cable with locking male SFF-8611 connectors, 100CM long

Vszerda

Vszerda PCIE Oculink SFF-8611 to Mini SAS SFF-8611 4i Cable 100CM

SKU CH-G1BS-9MH3B

Connects PCIe Oculink SFF-8611 to Mini SAS SFF-8611 4i with 12Gbps bandwidth, EMI shielding, locking connectors and 100cm braided length

  • TypeSAS
  • ColorMulticolored
  • Length18
  • Connector DetailPcie Oculink Sff-8611 to Mini Sas Sff-8611
  • Terminal GenderMale-to-Male
  • SpecificationsSAS
  • 12Gbps bandwidth for fast enterprise storage and compute
  • EMI shielding blocks interference in noisy server racks
  • Locking connectors prevent accidental disconnects during operation
  • Braided jacket resists wear in demanding data-centre use
  • 100cm length connects PCIe Oculink to Mini SAS 4i devices

Server Storage Connectivity

This 100 cm cable links a PCIe Oculink SFF-8611 port to a Mini SAS SFF-8611 4i interface, enabling 12 Gbps data transfer between server motherboards and enterprise storage arrays. The male-to-male design features EMI shielding, locking connectors and a durable braided jacket built for continuous operation in rack environments.

Enterprise Deployment Fit

It suits administrators wiring RAID controllers, high-density drive shelves or virtualization hosts that expose Oculink uplinks and require a direct SAS link without protocol conversion. Builders needing longer runs, angled connectors or an internal chassis routing kit should evaluate alternative cable assemblies.

Bandwidth and Protocol

The single specification that decides fit is the 12 Gbps SAS bandwidth rating, which matches the throughput ceiling of the connected controller and backplane; any system demanding a different signalling rate or protocol will not operate correctly with this assembly.

Highlights

  • 12Gbps bandwidth for fast enterprise storage and compute
  • EMI shielding blocks interference in noisy server racks
  • Locking connectors prevent accidental disconnects during operation
  • Braided jacket resists wear in demanding data-centre use
  • 100cm length connects PCIe Oculink to Mini SAS 4i devices

Specifications

BrandST-JY
ModelOCSFF8611-MNSFF11-4i
TypeSAS
ColorMulticolored
Length18
Connector DetailPcie Oculink Sff-8611 to Mini Sas Sff-8611
Terminal GenderMale-to-Male
SpecificationsSAS
ShieldingEMI shielding, locking connectors, durable braided design for enterprise environments
FeaturesEMI shielding, locking connectors, durable braided design for enterprise environments

Questions about this item

Will the locking connectors on the SFF-8611 ends need periodic replacement?

The locking connectors are built into the cable assembly and are not designed as a user-serviceable part. If a latch fails, the whole cable would be replaced.

What bandwidth ceiling limits sustained transfers on this 12Gbps SAS link?

The cable is rated for up to 12Gbps, so the SAS protocol ceiling is the first limit you will reach under sustained load.

Does the 100CM braided cable run hot or draw extra power during all-day RAID workloads?

The cable is passive and carries only signal, so it adds no measurable heat or power draw regardless of workload duration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.