We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda PCIe 8-pin female to dual 8-pin (6+2) male splitter cable, 18AWG

Vszerda

Vszerda PCIe 8-pin to 2×8-pin (6+2) splitter cable 18AWG

SKU CH-D1TX-E1R5S

Splits one PSU PCIe 8-pin into two 6+2-pin GPU connectors using 18 AWG copper

  • Splits one PSU 8-pin into two GPU 8-pin (6+2) connectors
  • 18AWG UL-listed copper conductors for stable current delivery
  • 8-inch length keeps cable routing tidy inside the case
  • 6+2-pin male ends fit both 6-pin and 8-pin graphics cards
  • Key-rail female connector ensures secure PSU attachment

Splitter cable for dual GPU power

This Vszerda cable splits a single PCIe 8-pin PSU connector into two 8-pin (6+2) male plugs. It lets one power supply output feed two graphics cards that each need an 8-pin or 6-pin connection. The 18AWG tinned copper conductors are UL listed. The cable is eight inches long.

6+2 connectors add compatibility

The 6+2 pin design on each male end means the same cable works with cards requiring either a 6-pin or an 8-pin PCIe power input. Builders do not need separate adapters for different GPU models from ASUS, ASRock, Radeon, Sapphire, EVGA or Gigabyte. The keyed female port on the PSU side helps prevent misalignment during installation.

Single rail shares total current

Both GPU connectors draw from the same 8-pin source on the power supply. The combined load of the two cards must stay within what that one PSU connector and its cable can safely deliver. Exceeding the connector rating risks overheating or shutdown. The eight-inch length limits placement options in larger cases.

Highlights

  • Splits one PSU 8-pin into two GPU 8-pin (6+2) connectors
  • 18AWG UL-listed copper conductors for stable current delivery
  • 8-inch length keeps cable routing tidy inside the case
  • 6+2-pin male ends fit both 6-pin and 8-pin graphics cards
  • Key-rail female connector ensures secure PSU attachment

Specifications

No published specifications for this item yet.

Questions about this item

Will the 18AWG conductors need replacement after prolonged mining loads?

The cable uses UL-listed 18AWG tinned copper cores designed for stable current delivery and extended service life under continuous demand.

What thermal limit appears first when the splitter runs at full GPU draw all day?

The 18AWG copper conductors and PVC insulation are rated for sustained loads, so connector temperature rise typically becomes the limiting factor before the wire itself.

How much extra heat or noise does the 8-inch splitter add inside the case?

The passive cable adds no fan noise; its 18AWG tinned copper and PVC jacket minimise resistive heating, so any temperature rise stays within normal PSU-cable limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.