Vszerda
Vszerda PCIe 8 Pin Female to CPU 8 Pin (4+4) Male EPS-12V Adapter Cable 34cm Black
Converts a PCIe 8-pin connector into an EPS-12V 8-pin (4+4) or P4 ATX 4-pin for dual, quad CPU and server motherboards, 34 cm, 18 AWG
- Converts PCIe power to CPU EPS-12V for server and dual-CPU boards
- Detachable 4+4 pin design fits both 8-pin and 4-pin motherboard headers
- 18 AWG tin-coated copper conductors deliver reliable current capacity
- 34 cm length suits compact and full-size chassis layouts
- Sleeved black finish keeps internal cable routing tidy
PCIe-to-EPS adapter for server boards
This Vszerda cable converts a PCIe 8-pin female connector into an EPS-12V 8-pin (4+4) male plug. It also works as a P4 ATX 4-pin connector for older motherboards. The 34 cm length uses 18 AWG tin-coated copper wire rated to the 1007 specification.
Replaces a missing EPS cable from the PSU
Use it when a power supply lacks the dedicated CPU 8-pin or 4+4 lead required by dual-socket or quad-socket server motherboards. The jump is worth it only when the PSU has spare PCIe 8-pin outputs and the motherboard demands EPS-12V power.
Builders with spare PCIe leads on the PSU
Suits anyone adding a workstation or server board to an existing supply that has unused PCIe connectors. Not for users who need to power a graphics card from a CPU header, or anyone whose PSU has no free PCIe 8-pin ports.
Highlights
- Converts PCIe power to CPU EPS-12V for server and dual-CPU boards
- Detachable 4+4 pin design fits both 8-pin and 4-pin motherboard headers
- 18 AWG tin-coated copper conductors deliver reliable current capacity
- 34 cm length suits compact and full-size chassis layouts
- Sleeved black finish keeps internal cable routing tidy
Specifications
| Brand | Vszerda |
|---|---|
| Model | CPU 8 Pin Male to 2x8Pin Male PCIe |
Questions about this item
What clearance does the 34 cm cable need behind the motherboard tray?
The cable is 34 cm long including both connectors, so allow at least that much depth behind the tray for a gentle bend radius without straining the 18 AWG wires.
Which way round does the detachable 4+4 CPU plug go on an EPS-12V header?
Match the keyed notch on the 4+4 male plug to the motherboard header; the split design lets you use either the full 8-pin or just the 4-pin half for P4 ATX boards.
When should the sleeved 18 AWG adapter be checked or replaced?
Inspect the sleeve and connectors whenever you rebuild; replace the cable if the tin-coated copper shows discoloration, the sleeve frays, or the latch tabs no longer click securely.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



