We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable splitting one 6-pin male plug into two 8-pin female connectors

Vszerda

Vszerda PCIe 6-pin to Dual 8-pin Power Splitter Cable 15cm

SKU CH-8EMQ-T5Y4D

Splits one 6-pin PCIe supply into two 8-pin (6+2) GPU connectors using 18AWG copper wire over 15cm

  • Splits one 6-pin PSU output into two 8-pin GPU connectors
  • 18 AWG UL-listed copper conductors for reliable current delivery
  • 15 cm length keeps cable routing tidy inside the case
  • Compatible with 6-pin and 8-pin graphics cards
  • Supports PCI Express 2.0 power specification

6-pin to dual 8-pin GPU power adapter

This 15 cm splitter converts a single PCIe 6-pin output from a power supply into two 8-pin (6+2) connectors for graphics cards. It uses UL-listed 18 AWG copper conductors and is intended for mining rigs or multi-GPU configurations such as SLI or CrossFire setups requiring extra PCIe 2.0 power connections. The short length keeps cable routing tidy inside compact chassis.

Check PSU 6-pin availability and GPU power draw

Verify that your power supply has a spare native 6-pin PCIe connector, not an adapter chain, to feed this splitter. Confirm the combined power draw of both graphics cards stays within the rating of that single 6-pin rail and the 18 AWG wires. Ensure each card accepts an 8-pin (6+2) plug and that your build does not need longer cables than the 15 cm supplied.

Splitter adds two GPU connectors from one PSU port

The bundle is the splitter cable itself; no extra software, adapters or mounting hardware are included. It effectively doubles the number of 8-pin GPU power sockets available from one 6-pin PSU output, enabling dual-card power without additional PSU cables. The 6+2 pin design fits both 6-pin and 8-pin graphics card sockets.

Highlights

  • Splits one 6-pin PSU output into two 8-pin GPU connectors
  • 18 AWG UL-listed copper conductors for reliable current delivery
  • 15 cm length keeps cable routing tidy inside the case
  • Compatible with 6-pin and 8-pin graphics cards
  • Supports PCI Express 2.0 power specification

Specifications

No published specifications for this item yet.

Questions about this item

Does the 15 cm splitter include both 8-pin (6+2) connectors or do I need a second cable?

One 6-pin male plug splits into two 8-pin (6+2) female sockets so a single cable powers two graphics-card connectors.

Is the 18 AWG cable rated for the power draw of two 8-pin graphics cards?

UL-listed 18 AWG copper conductors handle the current supplied by a standard 6-pin PCIe source; total draw stays within that single 6-pin limit.

Will the 6-inch length reach from my PSU to a card in the bottom PCIe 2.0 slot?

At 15 cm the cable suits tight builds or mining frames; measure your routing path before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.