Vszerda
Vszerda PCIe 6-pin to dual 6-pin splitter cable 20cm 18AWG
Splits one 6-pin PCIe connector into two 6-pin PCIe connectors using 18AWG copper wire and a 20cm length
- Splits one 6-pin into two GPU connectors
- 18AWG copper wire handles 12V power delivery
- 20cm ribbon length keeps case routing tidy
- Works with SLI and CrossfireX multi-GPU setups
- Cost-effective way to add extra PCIe power
Splitter cable for dual GPU power
The Vszerda PCIe 6-pin to dual 6-pin splitter cable adds two graphics-card power connectors from a single 6-pin PSU output. It targets builders and miners who need extra PCIe power without replacing the power supply. The 20 cm ribbon layout keeps routing tidy inside compact cases. 18 AWG copper conductors carry 12 V DC to each connector.
Capacity and headroom for mining rigs
Each 6-pin male plug delivers standard PCIe power for mid-range cards or mining GPUs that draw within the 6-pin specification. The single 6-pin female input limits total throughput to what the PSU rail provides, so dual high-wattage cards may exceed the cable’s safe capacity. The 20 cm length offers enough reach for adjacent slots but not for widely spaced cards.
Upgrade from molex adapters or daisy chains
This splitter replaces unreliable Molex-to-PCIe adapters or daisy-chained cables that can overheat under sustained load. The direct 6-pin to dual 6-pin design reduces connection points and voltage drop. The jump is worth it when a power supply has spare 6-pin ports but not enough native PCIe leads for a second card.
Highlights
- Splits one 6-pin into two GPU connectors
- 18AWG copper wire handles 12V power delivery
- 20cm ribbon length keeps case routing tidy
- Works with SLI and CrossfireX multi-GPU setups
- Cost-effective way to add extra PCIe power
Specifications
No published specifications for this item yet.
Questions about this item
Will this 18AWG splitter handle the 12V load from my older PSU's single 6-pin PCIe connector?
Yes, the 18AWG copper cable is rated for 12V DC and splits one 6-pin female connector into two 6-pin male connectors for compatible graphics cards.
How can I confirm the splitter is delivering power correctly once installed?
The GPU should power on and be detected by the system; if the card runs without instability or connector melting, the 20cm cable is functioning as intended.
Does the package include any adapters or just the 20cm 6-pin to dual 6-pin ribbon cable?
Only the splitter cable itself is included; no extra adapters, Molex connectors or mounting hardware are supplied.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
