We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle GPU power adapter with 12+4 pin and 16 pin connectors, aluminium housing, 180 degree turn

Vszerda

Vszerda PCIe 5.1 Adapter 600W 12+4pin 16pin 12VHPWR 180 Degree Right Angle RVS Type Black

SKU CH-XJXG-G05GY

Connects a 12+4 pin power supply to a 16 pin 12VHPWR graphics card with a 180 degree right angle for tight spaces and up to 600W delivery

  • Right-angle design prevents cable strain
  • 600W capacity supports high-end GPUs
  • 12V-2x6 connector matches 12VHPWR spec
  • Aluminium shell adds thermal venting
  • Compatible with RTX 3090Ti 4070Ti 4080 4090

Precision 180° Right-Angle Adapter

The Vszerda PCIe 5.1 adapter converts a 12+4pin source into a 16pin 12VHPWR connector rated for 600W. Its 180-degree right-angle RVS design routes the cable flat against the card, removing the sharp bends that stress terminals. The aluminium mech-armor shield adds structural rigidity and thermal venting for high-wattage GPU installations.

Upgrade from Straight 12VHPWR Leads

Builders replacing a straight 12VHPWR cable or an older angled adapter gain clearance in tight chassis and reduce mechanical load on the GPU socket. The jump is worth it when the graphics card sits close to a side panel or when the stock cable forces a radius tighter than the connector spec allows. The 2oz copper, 4-layer PCB handles sustained 600W loads without the thermal throttling risk seen on thinner flex cables.

Verify Clearance and GPU Model First

Measure the space between the card’s power socket and the nearest obstruction to confirm the 180-degree orientation points the cable in a usable direction. Cross-reference the exact GPU model against the supplier’s compatibility list; the MSI GeForce RTX 4090 Suprim Liquid X 24G is explicitly excluded. The adapter is not recommended for RTX 5090 cards due to extreme power spikes, and a 100% secure, gap-free seat is mandatory for safe operation.

Highlights

  • Right-angle design prevents cable strain
  • 600W capacity supports high-end GPUs
  • 12V-2x6 connector matches 12VHPWR spec
  • Aluminium shell adds thermal venting
  • Compatible with RTX 3090Ti 4070Ti 4080 4090

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 180 degree right-angle 12VHPWR connector need behind the graphics card?

The 180 degree right-angle design routes the cable parallel to the card, so measure from the GPU bracket to the side panel to confirm the adapter plus cable thickness fits.

How do I seat the 12+4 pin plug on the RTX 4090 without leaving a gap that causes heating?

Push the 16 pin connector straight in until the latch clicks flush with the GPU socket; a visible gap means the safety contacts are not fully engaged.

When should I replace this 600 W adapter if I upgrade to an RTX 5090 later?

The manufacturer notes the adapter is not recommended for RTX 5090 because of extreme power spikes, so plan to replace it with a native 12V-2x6 cable for that card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.