We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCIe 5.1 600W 12+4pin 16pin 12VHPWR 90 Degree Right Angle RVS White internal power cable

SKU CH-JSG0-ZD65G

Right-angled 12VHPWR adapter with reinforced PCB delivers up to 600W for RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards

  • 90-degree angled connector prevents cable strain and ensures full terminal contact
  • Mech-armor aluminium housing with thermal venting channels improves cooling and appearance
  • 12V-2x6 specification connector delivers up to 600W power safely
  • Reinforced 2oz copper 4-layer PCB supports stable high-performance operation
  • Compatible with RTX 3090Ti, 4070Ti, 4080 and 4090 graphics cards

Angled 12VHPWR adapter for high-power GPUs

This Vszerda PCIe 5.1 cable delivers up to 600W through a 12+4pin 12VHPWR connector. The 90-degree right-angle design routes power cleanly in tight chassis spaces. It targets builders installing RTX 3090Ti, 4070Ti, 4080 or 4090 graphics cards.

Mech-armour aluminium shell with four-layer PCB

A 2oz copper, four-layer PCB handles sustained current while the aluminium casing adds structural rigidity and venting channels. The RVS white finish matches light-themed builds. The angled housing prevents sharp wire bends that can stress terminals.

Verify GPU clearance and generation before ordering

The supplier notes the MSI GeForce RTX 4090 Suprim Liquid X 24G is not compatible. Use with an RTX 5090 is not recommended due to extreme power spikes. Confirm the card’s 12+4pin port orientation matches the 90-degree angle.

Highlights

  • 90-degree angled connector prevents cable strain and ensures full terminal contact
  • Mech-armor aluminium housing with thermal venting channels improves cooling and appearance
  • 12V-2x6 specification connector delivers up to 600W power safely
  • Reinforced 2oz copper 4-layer PCB supports stable high-performance operation
  • Compatible with RTX 3090Ti, 4070Ti, 4080 and 4090 graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

What PCIe standard does the 12VHPWR connector on this cable follow, and what power limit does it support?

The connector follows the PCIe 5.1 specification and is rated for up to 600W of power delivery.

What physical clearance does the 90 degree right angle design require at the graphics card end?

The 90 degree right angle connector sits flush against the GPU 12+4pin port, removing the need for cable bend radius behind the card.

How is the adapter installed, and what installation step must be avoided to prevent thermal issues?

Plug the 16pin side into the GPU until the latch clicks with zero gap; do not force or bend the cable near the connector after seating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.