We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 15 cm ribbon cable with right-angle and straight PCIe x4 connectors

Vszerda

Vszerda PCIe 4.0 x4 Riser Cable 15 cm 90/180° (R22SF-TL)

SKU CH-DKTK-C7Z2H

Extends a PCIe 4.0 x4 slot 15 cm with a 90/180° connector for vertical mounting of NVMe, capture or network cards

  • PCIe 4.0 x4 full-speed stability up to 60 cm cable length
  • 90/180 degree flexible routing for tight vertical GPU mounts
  • 1 oz copper PCB with gold fingers reduces oxidation-related crashes
  • Short wide PCB clears graphics card backplates without interference
  • No via-hole differential design prevents signal attenuation and micro-shorts

Vertical GPU Riser 15 cm

This 15 cm PCIe 4.0 x4 riser cable connects a graphics card vertically or flat against the motherboard. It uses a short, thick PCB with gold-plated fingers and a shielded high-frequency cable rated for full PCIe 4.0 speed up to 60 cm.

Builders with tight cases or vertical mounts

The 90° and 180° connector options suit small-form-factor cases and open-air test benches where a standard horizontal slot will not fit. Builders who need a longer reach or multiple riser cables for a multi-GPU array should look at other solutions.

PCIe 4.0 x4 signal integrity

The cable maintains PCIe 4.0 x4 throughput at 15 cm length thanks to differential signalling without via holes, 1 oz copper and a self-developed fourth-generation shielded design.

Highlights

  • PCIe 4.0 x4 full-speed stability up to 60 cm cable length
  • 90/180 degree flexible routing for tight vertical GPU mounts
  • 1 oz copper PCB with gold fingers reduces oxidation-related crashes
  • Short wide PCB clears graphics card backplates without interference
  • No via-hole differential design prevents signal attenuation and micro-shorts

Specifications

No published specifications for this item yet.

Questions about this item

What PCIe slot does my motherboard need for this 15 cm riser cable to work?

The cable is built for a PCIe 4.0 x4 slot; any motherboard with that slot type will carry the signal.

Will my existing PCIe 3.0 x4 capture card run at full speed through this cable?

The cable supports PCIe 4.0 x4 bandwidth and is backward compatible, so a PCIe 3.0 x4 card will operate at its native speed.

How can I verify the link is running at PCIe 4.0 x4 after I install the cable?

Check the link width and speed in GPU-Z or the OS device manager; both should report x4 and Gen 4.0 when the connection is healthy.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.