We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PCIe 4.0 x16 riser cable 200 mm with 90-degree connector

Vszerda

Vszerda PCIe 4.0 x16 Riser Cable 200mm 90 Degree White

SKU CH-80AV-TG7RA

PCIe 4.0 x16 riser cable extends a graphics card 200 mm with a 90-degree connector for tight builds

  • PCIe 4.0 delivers 64 Gb/s bandwidth at 16 GT/s
  • 200 mm length fits most chassis for flexible GPU placement
  • 90 degree right-angle design reduces cable stress and protects the slot
  • Plug-and-play installation with no BIOS setup required
  • Cable protector enhances durability and prevents damage

PCIe 4.0 x16 riser cable 200 mm

This white PCIe 4.0 x16 riser cable measures 200 mm and provides a 90-degree right-angle connector. It delivers a 16 GT/s raw transfer rate and over 64 Gb/s bi-directional bandwidth with PCIe 4.0 devices while remaining fully backward compatible with PCIe 3.0 hardware. The flexible design includes a cable protector for added durability and requires no BIOS configuration.

Suited for compact or vertical GPU builds

Builders fitting a graphics card into a small ITX chassis or mounting it vertically in a larger tower will benefit from the short length and right-angle plug that reduce cable bulk and bending stress. The extender works with mainstream motherboards and supported GPUs when installed in a 16x slot with system power off. It does not suit systems that need a longer cable run or a straight connector.

16 GT/s transfer rate decides compatibility

The single specification that determines whether this riser matches the build is the 16 GT/s raw transfer rate of PCIe 4.0 x16, which provides over 64 Gb/s bi-directional bandwidth. If the motherboard and graphics card both operate at that rate the cable will not limit performance; if either device is limited to PCIe 3.0 the link will fall back to the lower speed.

Highlights

  • PCIe 4.0 delivers 64 Gb/s bandwidth at 16 GT/s
  • 200 mm length fits most chassis for flexible GPU placement
  • 90 degree right-angle design reduces cable stress and protects the slot
  • Plug-and-play installation with no BIOS setup required
  • Cable protector enhances durability and prevents damage

Specifications

No published specifications for this item yet.

Questions about this item

Will the 16 GT/s signal hold up on a 200 mm run inside a case?

The cable is rated for PCIe 4.0 at 16 GT/s and 64 Gb/s bi-directional, so the 200 mm length is designed to maintain full speed.

Does the 90 degree plug run hotter or draw more power than a straight connector?

The right-angle design only changes the physical routing; it adds no active components, so heat and power draw stay the same as a straight riser.

What motherboard slot and GPU power connectors are needed for this riser to work?

You need a free PCIe x16 slot on the motherboard and the normal auxiliary power cables from your PSU for the graphics card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.