We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black MCIO x8 cable splitting to two U.2 SFF-8639 connectors with 15-pin power, 50 cm long

Vszerda

Vszerda PCIe 4.0 MCIO x8 to 2× SFF-8639 U.2 Cable 50 cm

SKU CH-AVVT-GMCMD

Connects one MCIO x8 host port to two U.2 NVMe SSDs with integrated 15-pin power over a 50 cm PCIe 4.0 link

  • TypePCIe 4.0 \ SAS
  • ColorBlack
  • Length39.4
  • Terminal GenderMale-to-Female
  • Speed128 gigabits_per_second
  • ConductorCopper
  • PCIe 4.0 delivers 128 Gb/s bandwidth for NVMe SSDs
  • Dual SFF-8639 ports connect two U.2 drives simultaneously
  • 74-pin MCIO x8 and dual 68-pin connectors ensure enterprise-grade SAS compliance
  • 15-pin SATA power cable supplies stable power to both SSDs
  • 50 cm length fits compact server and workstation chassis

Target Build

This Vszerda cable connects a single MCIO x8 host port to two SFF-8639 U.2 NVMe SSDs. It is built for workstations or servers that need to add high-speed flash storage without occupying standard drive bays. The 50 cm length suits typical chassis routing. Buyers who need more than two U.2 devices or a different host connector should look elsewhere.

Sustained Behaviour

The link runs at PCIe 4.0 x8, providing 128 gigabits per second of total bandwidth shared across both drives. Backward compatibility with PCIe 3.0 allows the same cable to function in older platforms at reduced throughput. Each SFF-8639 connector uses 68 pins to carry data and side-band signals for dual SSD operation.

Thermals Noise Power

Passive copper conductors add no active cooling requirement and generate no acoustic noise. A 15-pin SATA power tail supplies the U.2 drives directly from the system PSU, so no extra power adapter is needed. The cable complies with SCSI SAS and PCIe Gen4 electrical specifications for reliable enterprise deployment.

Highlights

  • PCIe 4.0 delivers 128 Gb/s bandwidth for NVMe SSDs
  • Dual SFF-8639 ports connect two U.2 drives simultaneously
  • 74-pin MCIO x8 and dual 68-pin connectors ensure enterprise-grade SAS compliance
  • 15-pin SATA power cable supplies stable power to both SSDs
  • 50 cm length fits compact server and workstation chassis

Specifications

BrandVszerda
ModelLLS-CB-1MC2UT-02
TypePCIe 4.0 \ SAS
ColorBlack
Length39.4
Terminal GenderMale-to-Female
Speed128 gigabits_per_second
ConductorCopper

Questions about this item

Does the 16 GT/s PCIe 4.0 link generate extra heat or power draw during all-day use?

The cable itself is passive copper and adds no active heat or power; the 128 gigabits_per_second signal is carried by the host and the two U.2 NVMe SSDs.

What connector must already exist on my motherboard or controller for this MCIO x8 cable to plug in?

A 74-pin SFF-TA-1016 MCIO x8 receptacle is required on the host side.

Will the dual SFF-8639 ports work with PCIe 3.0 U.2 drives I already own?

Yes, the cable is backward compatible with PCI-Express 3.0, so older U.2 NVMe SSDs will operate at their rated Gen 3 speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.