We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 36-pin PCIe 1x extension cable, 20 cm, 180-degree connector, soft shielded ribbon

Vszerda

Vszerda PCIe 36-pin 1x extension cable 180° 20 cm

SKU CH-PPKA-48SHX

A 20 cm, 36-pin PCIe 1x extension cable with 180° connectors, EMI shielding and 28/30 AWG conductors for 1U/2U cases

  • Extends PCIe slot reach by 20 cm
  • 180° connector fits tight 1U or 2U chassis
  • 36-pin 1x link supports x1, x4, x8 and x16 cards
  • 28/30 AWG pure copper with tin plating for stable signal
  • TPE sleeve and PE insulation shield against EMI

36-pin PCIe 1x extension cable

This 36-pin PCIe extension cable adds 20 cm of reach for a single-lane PCIe device. It uses 28/30 AWG pure copper conductors with tin plating and axial construction for stable Gen3 8 Gbps signalling. EMI shielding combines a TPE sleeve and PE insulation layer. The 180-degree connector eases routing in 1U or 2U chassis.

Suited for single-lane risers in compact servers

Builders fitting a PCIe 1x, 4x, 8x or 16x card that will operate at 1x speed can use this cable in space-constrained cases. It is not for workloads that need multi-lane throughput such as GPU mining rigs or high-speed storage arrays. The 1x electrical limit means wider cards will run at reduced bandwidth.

Single-lane electrical operation

Although the connector accepts up to 16x cards, the cable carries only one PCIe lane, so any device plugged into it negotiates at 1x speed regardless of slot width. This single specification determines whether the part meets the bandwidth needs of the intended card.

Highlights

  • Extends PCIe slot reach by 20 cm
  • 180° connector fits tight 1U or 2U chassis
  • 36-pin 1x link supports x1, x4, x8 and x16 cards
  • 28/30 AWG pure copper with tin plating for stable signal
  • TPE sleeve and PE insulation shield against EMI

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum PCIe lane width this 36-pin extension cable can carry?

The cable supports PCIe x1, x4, x8 and x16 cards, but all operate at x1 speed only.

Does the 20 cm cable generate noticeable heat or noise during continuous operation?

As a passive copper cable it produces no noise and negligible heat under normal use.

Which slot type must the motherboard provide for this 180-degree extension to connect?

The host side requires a standard PCIe x16 slot to accept the 36-pin plug.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.