We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCIe 3.0/4.0 M.2 NVME/NGFF SSD Ribbon Flex Extension Cable 30cm

SKU CH-3CSS-4ACN3

A flexible 30 cm PCIe 3.0/4.0 ribbon cable extends M.2 NVME or NGFF SSDs up to 64 Gbps while keeping the connection shock-resistant

  • TypePCIE
  • Length0.3
  • Connector DetailPcie
  • Terminal GenderMale-to-Female
  • Speed64 gigabits_per_second
  • Featuresshock-resistant
  • Extends NVMe drives at up to 64Gbps via PCIe 3.0/4.0
  • Extends SATA M.2 SSDs at up to 6Gbps over the same cable
  • 30cm ribbon keeps signal integrity in tight chassis spaces
  • Shock-resistant construction protects data during transport or vibration
  • Male-to-female connectors enable straight-through NVMe-to-NVMe or SATA-to-SATA links

PCIe 3.0/4.0 M.2 extension cable

This 30cm ribbon cable extends an M.2 NVMe or NGFF SATA SSD away from the motherboard slot. It carries PCIe 3.0 and 4.0 signals at up to 64Gbps for NVMe 1.4 drives and 6Gbps for SATA-based NGFF modules. The male-to-female connectors support 2230, 2242, 2260 and 2280 form factors. It is built for builders who need flexible drive placement in tight chassis.

Protocol and keying check before ordering

The cable only passes signals straight through — NVMe to NVMe or SATA to SATA — and cannot convert between the two protocols. Verify that your motherboard M.2 slot supports the same protocol as the SSD you plan to attach; a SATA drive will not be recognised in an NVMe-only slot. The package includes two small PCBA boards and the 30cm ribbon. Buyers who need protocol conversion or longer reach should look elsewhere.

Thermals noise and power in normal use

The ribbon adds no active components, so it draws no extra power and generates no noise of its own. Its shock-resistant, super-soft construction does not impede airflow around the drive or motherboard. Drive temperatures will match those seen when the SSD is mounted directly in the slot. No additional cooling or power-headroom considerations are introduced by the cable.

Highlights

  • Extends NVMe drives at up to 64Gbps via PCIe 3.0/4.0
  • Extends SATA M.2 SSDs at up to 6Gbps over the same cable
  • 30cm ribbon keeps signal integrity in tight chassis spaces
  • Shock-resistant construction protects data during transport or vibration
  • Male-to-female connectors enable straight-through NVMe-to-NVMe or SATA-to-SATA links

Specifications

Brandchenyang
ModelCY-EP-050-BK
TypePCIE
Length0.3
Connector DetailPcie
Terminal GenderMale-to-Female
Speed64 gigabits_per_second
Featuresshock-resistant

Questions about this item

What comes in the package and do I need any extra parts to install an M.2 2280 NVMe drive?

The package contains two PCBA boards and one 30cm ribbon cable. No extra parts are required; the cable plugs directly between the motherboard M.2 slot and the drive.

Which M.2 form factors does the 30cm extension support and does it matter if my drive is NVMe or SATA?

The cable supports 2230, 2242, 2260 and 2280 lengths. It works for NVMe-to-NVMe or SATA-to-SATA extension only; it cannot convert between the two protocols.

What does the 64Gbps headline speed mean when the cable is fitted in a PCIe 3.0 system?

The 64Gbps rating matches PCIe 4.0 x4. In a PCIe 3.0 slot the link will run at the lower 32Gbps ceiling, so actual throughput is limited by the motherboard generation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.