Vszerda
Vszerda PCIe 1x Extension Cable 10cm Silver Shielded
A 10cm silver-plated shielded PCIe 1x extender with 90-degree slot, 30AWG wire and 99% EMI shielding for tight spaces
- ColorSilver
- Stable full-speed transmission backed by US 3M silver-plated 30AWG shielded wire
- 99 % electromagnetic interference shielding from silver-plated layer over 30AWG copper
- Operates reliably from -20 °C to 90 °C even when folded or bent
- 90 ° PCI-E slot needs only 6 mm height to clear blocked expansion slots
- 24 K gold-plated slot and fingers support 1x 4x 8x 16x devices with corrosion resistance
Compact PCIe 1x Riser Cable for Tight Builds
This 10 cm silver-plated extension cable adds reach for a single PCIe 1x link in space-constrained systems. The 90-degree slot needs only 6 mm of vertical clearance, so cards fit where a straight connector cannot. It suits enthusiasts, workstation integrators and industrial equipment such as medical, ATM or robotics platforms.
Signal Integrity and Operating Range
Silver-plated 30AWG conductors with a 3M shielding layer block 99% of electromagnetic interference for lossless full-speed transmission. The ribbon is just 0.75 mm thick and remains stable from -20 °C to 90 °C. Folding or bending the cable does not degrade performance.
Single-Lane Link Width
The cable carries only a PCIe 1x electrical connection, so any device plugged into it negotiates at x1 bandwidth regardless of its physical connector size. Builders who need x4, x8 or x16 throughput must choose a different riser.
Highlights
- Stable full-speed transmission backed by US 3M silver-plated 30AWG shielded wire
- 99 % electromagnetic interference shielding from silver-plated layer over 30AWG copper
- Operates reliably from -20 °C to 90 °C even when folded or bent
- 90 ° PCI-E slot needs only 6 mm height to clear blocked expansion slots
- 24 K gold-plated slot and fingers support 1x 4x 8x 16x devices with corrosion resistance
Specifications
| Brand | Vszerda |
|---|---|
| Color | Silver |
Questions about this item
How do I install the 90-degree PCIe slot and what clearance mistake should I avoid?
The slot needs only 6 mm of vertical space; measure the gap above your motherboard before routing the 10 cm cable so the fold does not press against the case panel.
Will the 24 K gold-plated contacts or the silver-plated shielding need replacement over time?
Both are rated for the full -20 °C to 90 °C range; no scheduled replacement is required unless physical damage occurs.
At what point does signal loss appear first during sustained high-speed use?
The 30 AWG copper with 99 % EMI shielding is specified for lossless transmission at full PCIe 1× speed within the stated temperature limits.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



