We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda PCI-E to SATA adapter card with four ports and low-profile bracket

Vszerda

Vszerda PCI-E to SATA Adapter 4 Port 6Gbps Low Profile Bracket SATA Cable

SKU CH-J84T-4M3VX

Adds four 6 Gbps SATA 3.0 ports through any PCIe slot, includes a low-profile bracket and alloy heatsink for stable operation

  • Adds four SATA 3.0 ports at 6Gbps
  • Alloy heatsink keeps ports at room temperature
  • AHCI and NCQ raise drive speed by 5-20%
  • 15U gold contacts cut wear for stable transfer
  • Low-profile bracket fits 4U and 2U chassis

PCIe SATA expansion with four ports

This PCIe SATA adapter adds four 6Gbps SATA 3.0 ports through a single PCI Express lane. It fits standard and low-profile cases with the included bracket and works with Windows 7, 8, 10, 11, Vista, Mac and Linux. The card uses a gold-plated conductor and a thick PCB for stable operation.

Suits builders adding mechanical drives

Ideal for users who need more SATA connections for hard drives or SSDs in desktop systems or NAS units. Not suited for anyone who requires UEFI boot support, because the card only supports MBR boot. Also unsuitable for systems running Windows XP or Server 2003, which are not supported.

MBR-only boot limitation

The controller does not support UEFI boot, so the operating system must be installed in MBR mode. This single constraint decides whether the card can be used as a boot device in a modern UEFI-based build.

Highlights

  • Adds four SATA 3.0 ports at 6Gbps
  • Alloy heatsink keeps ports at room temperature
  • AHCI and NCQ raise drive speed by 5-20%
  • 15U gold contacts cut wear for stable transfer
  • Low-profile bracket fits 4U and 2U chassis

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda PCI-E to SATA adapter into my PC?

Insert the card into any PCI Express X1, X4, X8 or X16 slot, secure the low-profile bracket, connect up to four SATA drives, then boot. The card only supports MBR boot; UEFI boot will not work.

What maintenance or replacement will the Vszerda PCI-E to SATA adapter need later?

The 15U gold-plated conductors and thick PCB resist wear and temperature stress, so no routine maintenance is required. If a port fails, the entire expansion card must be replaced.

What limit appears first when the Vszerda PCI-E to SATA adapter runs under sustained load?

Each of the four SATA 3.0 ports is capped at 6Gbps, and the PCIe lane width you use (X1, X4, X8 or X16) sets the total throughput ceiling for all drives combined.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.