We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green breakout board with twelve 6-pin connectors and 80 cm cable

Vszerda

Vszerda PCI-E 64Pin to 12x 6Pin Breakout Board 80cm internal power cable

SKU CH-5J7F-B0PPQ

Converts a 64-pin server PSU into twelve 6-pin GPU connectors with an 80 cm cable, real-time voltmeter and on-board power button

  • 64-pin ATX breakout feeds up to 12 or 17 PCIe 6-pin connectors
  • Real-time voltmeter LED shows main rail voltage while mining
  • On-board white button powers PSU on/off independently
  • 80 cm cable reaches full-tower GPU arrays cleanly
  • Compatible with 700 W to 1600 W HP and common server PSUs

Mining Power Distribution

This breakout board converts a single 64-pin server PSU connector into twelve 6-pin PCIe outputs for GPU mining rigs. It supports HP server power supplies such as the DPS-1200FB and PS-2751 series up to 1600 watts. A built-in voltmeter LED displays real-time input voltage while a push-button switch controls power-on sequencing.

Connector Count and PSU Compatibility

The board provides twelve 6-pin PCIe connectors and is validated for HP server units including the DPS-700LB, DPS-750RB and PS-2112-5L models. A secondary 4-pin floppy connector allows dual-PSU simultaneous start-up on the green 12-port variant. Correct pin orientation is mandatory to avoid equipment damage.

Sustained Load Monitoring

Under continuous mining loads the onboard LED voltmeter reports the main rail voltage in real time so operators can detect sag before instability occurs. The push-button switch enables manual power cycling without unplugging the PSU. When the floppy lead is connected to the primary supply the switch defers to the PSU’s own on/off behaviour.

Highlights

  • 64-pin ATX breakout feeds up to 12 or 17 PCIe 6-pin connectors
  • Real-time voltmeter LED shows main rail voltage while mining
  • On-board white button powers PSU on/off independently
  • 80 cm cable reaches full-tower GPU arrays cleanly
  • Compatible with 700 W to 1600 W HP and common server PSUs

Specifications

No published specifications for this item yet.

Questions about this item

How many PCI-E devices can the 64-pin breakout board power at once?

The board provides twelve 6-pin connectors, with an alternative layout offering up to seventeen connectors for high-density mining rigs.

What interface does the 80 cm cable use to connect to the server PSU?

It plugs into the ATX 6-pin TAT bus interface found on compatible HP and other server power supplies.

What clearance is needed to mount the breakout board inside a chassis?

The 80 cm cable allows flexible placement, while the board itself fits standard server PSU brackets and requires no proprietary mounting holes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.