We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCI-E 5.0 MCIO STR 74Pin to Dual 38Pin Extender Cable 50cm

SKU CH-R8WK-KQ4AT

Connects a single 74-pin MCIO port to two 38-pin MCIO ports for 24 Gbps PCI-E 5.0 data transfer over a 50 cm cable

  • ColorBlack
  • Fast data transfers up to 24 Gbps with MCIO 74-pin to dual 38-pin design
  • 50 cm length gives flexible routing inside chassis
  • Plug-and-play connection for SAS, PCIe and Ethernet signals
  • Supports cable-to-board and card-to-board system layouts
  • Built for data-centre, networking and telecom environments

PCIe 5.0 MCIO 74-pin to dual 38-pin extender

This 50 cm cable splits a single MCIO 74-pin male connector into two MCIO 38-pin male connectors. It supports PCIe 5.0 signalling at up to 24 Gbps for high-speed data transfer. The assembly is built for cable-to-board and card-to-board applications in dense systems.

Suited for data-centre

Builders connecting MCIO 8x SSDs or similar devices to a 74-pin host port will find the pin-out matches directly. It is not for consumer motherboards lacking MCIO headers, nor for installations that require a different pin count or longer reach than 50 cm.

Handles 24 Gbps per lane across the 74-pin interface

The dual 38-pin branches share the total bandwidth of the single 74-pin uplink, so aggregate throughput stays within the 24 Gbps limit. Runs out when the host controller or downstream devices demand more lanes or a higher signalling rate than PCIe 5.0 provides.

Highlights

  • Fast data transfers up to 24 Gbps with MCIO 74-pin to dual 38-pin design
  • 50 cm length gives flexible routing inside chassis
  • Plug-and-play connection for SAS, PCIe and Ethernet signals
  • Supports cable-to-board and card-to-board system layouts
  • Built for data-centre, networking and telecom environments

Specifications

BrandVszerda
ModelNF-SF-080
ColorBlack

Questions about this item

What connector must my SSD or backplane provide to accept the dual 38-pin ends of this cable?

Each 38-pin MCIO plug mates with an MCIO 8x receptacle on the drive or backplane.

Will the PCIe 5.0 74-pin host connector work with a PCIe 4.0 motherboard or RAID card?

Yes, the 74-pin MCIO interface is backward compatible with PCIe 4.0 and 3.0 hosts.

How can I confirm the link is running at the rated 24 Gbps per lane after installation?

Check the negotiated link speed in the OS device manager or BIOS; it should report 24 GT/s per lane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.