We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PCIe 3.0 16x riser cable with 90 degree connector, 30cm length

Vszerda

Vszerda PCI-E 3.0 16x Riser Cable 90° White 30cm HBZ-X16-1890B

SKU CH-QQAY-FSAAA

A 30 cm PCI-E 3.0 16x riser with a 90° white connector and 5U gold-plated contacts for stable GPU or add-in-card mounting

  • 90° right-angle design fits tight chassis spaces
  • PCI-E 3.0 full-speed link keeps GPU bandwidth intact
  • 5U immersion-gold fingers resist wear for stable signals
  • 30 cm flexible cable routes cleanly around components
  • Branded slot clamps card firmly to stop disconnects

PCI-E 3.0 16x Riser for GPU Extension

This white 90-degree right-angle cable extends a PCI-E 16x slot by 30 cm so a graphics card or other expansion device can be mounted away from the motherboard. It targets builders who need flexible routing in compact cases or mining rigs where card spacing matters. The 16-lane connection carries full PCI-E 3.0 bandwidth for compatible GPUs, sound cards and wired network adapters.

5U Immersion Gold Fingers and Branded Slot

Gold fingers use a 5U immersion gold process for abrasion resistance and stable signal transmission. A first-line brand slot increases clamping force to reduce loosening that can cause black-screen or blue-screen failures. German-patented wire is soft, bendable and foldable, while an all-inclusive protective cover guards against short circuits and solder-joint oxidation during installation.

PCI-E 3.0 Limitation on 4.0 Platforms

The cable does not support PCI-E 4.0 operation. On a 4.0-capable motherboard and graphics card the BIOS must be set to GEN3 3.0 mode before the riser is connected, otherwise the link will not train correctly. Buyers who require native 4.0 throughput without BIOS changes cannot use this extender for that purpose.

Highlights

  • 90° right-angle design fits tight chassis spaces
  • PCI-E 3.0 full-speed link keeps GPU bandwidth intact
  • 5U immersion-gold fingers resist wear for stable signals
  • 30 cm flexible cable routes cleanly around components
  • Branded slot clamps card firmly to stop disconnects

Specifications

No published specifications for this item yet.

Questions about this item

Does the PCI-E 3.0 16x riser cable limit bandwidth when used with a PCI-E 4.0 graphics card?

Yes, the cable only supports PCI-E 3.0 full speed. You must set the motherboard slot to GEN3 3.0 mode in BIOS before installing the riser, otherwise the link will not work.

What clearance does the 90-degree right-angle connector need behind the graphics card?

The 90-degree connector points upward from the slot, so you need enough vertical space behind the card for the 30 cm cable to bend without putting strain on the gold fingers.

How do you install the riser without damaging the 5U immersion-gold fingers?

Power off the system, insert the riser into the motherboard slot first, then plug the graphics card into the riser's socket. Do not force the card; the first-line brand slot provides strong clamping force when seated correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.