We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 90-degree PCI-E 3.0 16x riser cable with flexible white sheathing and gold edge connectors, 45cm long

Vszerda

Vszerda PCI-E 3.0 16x 90° Extension Cable White 45cm

SKU CH-P8R8-F3YGJ

A 45 cm white PCI-E 3.0 16x riser with a 90 degree right-angle connector, 5U immersion-gold fingers and flexible shielded cable for graphics cards or other PCI-E devices

  • 90° right-angle connector fits tight spaces without stressing the slot
  • 45 cm flexible cable routes cleanly around components and bends easily
  • PCIe 3.0 16x full-speed link keeps graphics and add-in cards at native bandwidth
  • 5U immersion-gold fingers resist wear and deliver stable signal transmission
  • Premium branded slot and full protective sleeve prevent shorts and oxidation

90-Degree PCI-E 3.0 Extension Cable

This 45 cm white riser cable provides a right-angle connection for PCI-E 16x devices. It suits builders fitting graphics cards, sound cards or network cards into tight chassis layouts. The 90-degree plug reduces strain on the motherboard slot and improves cable routing in compact builds. It is intended for systems running at PCI-E 3.0 speeds.

PCI-E 3.0 Capacity and Headroom

The extender carries full PCI-E 3.0 16x bandwidth for compatible graphics cards, sound cards and wired network cards. Signal integrity is supported by 5U immersion-gold fingers and a first-line brand slot that resists loosening. The cable does not operate in PCI-E 4.0 mode; 4.0 hardware must be forced to Gen 3 in BIOS before use. Performance drops if the link is not locked to 3.0 speeds.

Practical Limits of the PCI-E 3.0 Interface

PCI-E 4.0 devices will not negotiate Gen 4 across this cable, so the host slot must be set to Gen 3 manually. The 45 cm length and flexible German-patented wire allow tight bends, but the all-inclusive cover is required to prevent shorts from exposed conductors. Builds needing native Gen 4 throughput or longer reach cannot use this extender.

Highlights

  • 90° right-angle connector fits tight spaces without stressing the slot
  • 45 cm flexible cable routes cleanly around components and bends easily
  • PCIe 3.0 16x full-speed link keeps graphics and add-in cards at native bandwidth
  • 5U immersion-gold fingers resist wear and deliver stable signal transmission
  • Premium branded slot and full protective sleeve prevent shorts and oxidation

Specifications

No published specifications for this item yet.

Questions about this item

Will the 90° right-angle PCI-E 3.0 16x extender fit alongside my existing PCI-E 3.0 graphics card in a tight case?

The 90° right-angle connector lets the 45 cm cable route parallel to the motherboard, so a full-length PCI-E 3.0 16x graphics card can sit beside other expansion cards without the straight plug blocking adjacent slots.

How can I verify the cable is running at PCI-E 3.0 full speed after installation?

Check the motherboard BIOS or GPU-Z — the link should report PCI-E 3.0 x16; if it shows 4.0, switch the slot to GEN3 3.0 mode in BIOS as the extender does not support 4.0 operation.

Does the package include a power adapter for the riser or only the 45 cm PCI-E 3.0 16x extension cable?

Only the 45 cm white PCI-E 3.0 16x to 16x extension cable with 5U immersion-gold fingers and all-inclusive protective cover is supplied; any auxiliary power for the graphics card must come from your PSU.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.