We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green narrow circuit board with SATA and IDE connectors

Vszerda

Vszerda PATA IDE to SATA Adapter 7+15 Pin 3.5/2.5 Narrow Board

SKU CH-1P6X-M8AAT

Converts SATA drives to IDE interfaces with 7+15 pin connectors for 3.5 and 2.5 inch devices, supports ATA 100/133, narrow 1.7cm board

  • ColorNarrow board
  • Conductorcopper
  • Converts PATA IDE drives to SATA with 7+15 pin female connectors
  • Converts SATA drives to PATA IDE with 40 pin male connector
  • Supports ATA 100 and 133 transfer modes for compatibility
  • Narrow 1.7 cm board fits 2.5 and 3.5 inch drive bays
  • Plug and play adapter requires no driver installation

Narrow-board IDE-to-SATA adapter

This Vszerda adapter converts a Parallel ATA or IDE interface to a Serial ATA connection for 3.5-inch and 2.5-inch drives. It fits older and newer computer systems that need to bridge the two interface types. The narrow board measures 1.7 cm wide for tight installations.

Bidirectional conversion with Molex power

The adapter carries female SATA data and power connectors plus male IDE data and Molex power connectors. It supports ATA 100 and ATA 133 modes and works with CD-ROM, CD-RW, DVD, DVD-RAM and hard drives. No driver installation is required for operation.

Not for external enclosures

The supplier notes that adapters of this type cannot be used with external hard drive enclosures and will not function in that scenario. Buyers who need to connect a SATA drive inside a USB or eSATA enclosure should choose a different solution.

Highlights

  • Converts PATA IDE drives to SATA with 7+15 pin female connectors
  • Converts SATA drives to PATA IDE with 40 pin male connector
  • Supports ATA 100 and 133 transfer modes for compatibility
  • Narrow 1.7 cm board fits 2.5 and 3.5 inch drive bays
  • Plug and play adapter requires no driver installation

Specifications

BrandVszerda
ColorNarrow board
Conductorcopper

Questions about this item

Will the 40-pin IDE connector or 4-pin Molex power plug need periodic replacement?

The adapter uses copper conductors and a passive circuit board with no moving parts; the connectors are rated for standard insertion cycles and do not have a scheduled replacement interval.

What throughput ceiling appears first when the adapter runs at ATA 133 speeds for long periods?

The bridge is limited to the ATA 133 specification, so sustained transfers cannot exceed that ceiling regardless of the attached SATA drive.

Does the narrow 1.7 cm board run warm or draw extra power during continuous operation?

The adapter is a passive device with no active components, so it adds negligible heat and draws only the minimal current required for signal conversion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.