We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Right-angled SFF-86114i plug to four straight SATA sockets, 50 cm cable

Vszerda

Vszerda Oculink SFF-86114i to 4X SATA SAS cable 50cm

SKU CH-W0Z2-A1NCQ

Connects an Oculink SFF-86114i port to four SATA or SAS drives at 12 Gbps over 50 cm

  • TypeSAS
  • Length18
  • Connector Number4
  • Connector DetailSas to Sata
  • Terminal GenderMale-to-Female
  • Speed12 gigabits_per_second
  • 12 Gbps transfer speed for fast server data throughput
  • SFF-86114i to four SATA connectors simplifies drive connections
  • 50 cm length fits typical chassis routing needs
  • Right-angle locking design keeps cables secure under vibration
  • Male-to-female terminals enable direct controller-to-drive linking

Server Storage Cable

This 50cm Oculink SFF-86114i to 4X SATA SAS cable connects a host controller to four SATA or SAS drives. It suits server builders and storage administrators who need to expand internal drive arrays using a single high-speed port. The male-to-female design links an SFF-8611 interface directly to standard drive backplanes or breakout boards.

Build Integration

The cable requires a motherboard or RAID controller equipped with an SFF-8611 connector and accepts four SATA or SAS device ends. It frees additional controller ports by consolidating four drives onto one Oculink link. The 50cm length fits typical 2U or 4U chassis routing without excess slack that blocks airflow.

Sustained Operation

Rated for 12Gbps SAS signalling, the assembly maintains signal integrity across all four lanes during continuous read and write workloads. High-speed shielding and secure right-angle locks prevent disconnects caused by vibration or thermal cycling in rack environments. The construction supports reliable throughput for parity rebuilds, backup streams and database volumes over extended periods.

Highlights

  • 12 Gbps transfer speed for fast server data throughput
  • SFF-86114i to four SATA connectors simplifies drive connections
  • 50 cm length fits typical chassis routing needs
  • Right-angle locking design keeps cables secure under vibration
  • Male-to-female terminals enable direct controller-to-drive linking

Specifications

BrandST-JY
ModelOCSFF8611-4XST
TypeSAS
Length18
Connector Number4
Connector DetailSas to Sata
Terminal GenderMale-to-Female
Speed12 gigabits_per_second
SpecificationsSAS
ShieldingHigh-speed transfer, secure right-angle lock
FeaturesHigh-speed transfer, secure right-angle lock

Questions about this item

What sustained data rate does the 12Gbps SAS link actually maintain under continuous server load?

The cable is rated for 12Gbps SAS signalling, so the practical ceiling under sustained use is the 12Gbps lane speed of the SFF-86114i interface.

Does the 50cm length and right-angle lock add noticeable heat or power draw when the cable runs all day in a chassis?

The passive copper assembly draws no extra power and adds negligible heat; the right-angle lock only secures the connector without affecting thermals.

Which controller or motherboard port must I already have to plug in the SFF-86114i end of this cable?

You need a motherboard or RAID controller equipped with an SFF-8611 (Oculink) port to accept the SFF-86114i connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.