We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50cm active cable with SFF-8611 and SFF-8654 male connectors

Vszerda

Vszerda OCuLink SFF-8611 4i to SFF-8654 Active Cable 50cm

SKU CH-4GYQ-YQB22

Connects an OCuLink SFF-8611 controller to an SFF-8654 backplane at 8Gbps over 50cm with active latching

  • TypeOculink PCIE
  • ColorBlack
  • Connector DetailOculink
  • Terminal GenderMale-to-Male
  • Speed8 gigabits_per_second
  • SpecificationsOculink PCIE
  • Connect backplanes to controllers with SFF-8611 and SFF-8654 ports
  • Active latch locks securely to prevent accidental disconnection
  • 8 Gbps data rate supports high-speed storage traffic
  • 50 cm length fits compact server chassis
  • Male-to-male design enables direct device-to-device links

Connector pairing

This Vszerda cable links an OCuLink SFF-8611 4i port to an SFF-8654 Slimline connector. It suits builders wiring a backplane to a host controller inside a server or workstation chassis.

8 Gbps signalling

The active cable supports data transfer rates up to 8 Gbps per lane. That single speed figure determines whether the link matches your controller and backplane specification.

Thermals and power

Active circuitry draws a small amount of power from the host port and generates negligible heat. No fan or heatsink is required and the cable adds no audible noise to the system.

Highlights

  • Connect backplanes to controllers with SFF-8611 and SFF-8654 ports
  • Active latch locks securely to prevent accidental disconnection
  • 8 Gbps data rate supports high-speed storage traffic
  • 50 cm length fits compact server chassis
  • Male-to-male design enables direct device-to-device links

Specifications

Brandxiwai
ModelSF-060-XY
TypeOculink PCIE
ColorBlack
Connector DetailOculink
Terminal GenderMale-to-Male
Speed8 gigabits_per_second
SpecificationsOculink PCIE
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

What does the 8 Gbps transfer rate mean once the cable is installed in my system?

The cable carries up to 8 Gbps per lane across four lanes, giving the attached SFF-8654 backplane or SSD the full bandwidth the controller provides.

How does the OCuLink SFF-8611 to SFF-8654 interface limit real-world performance?

The link is rated at 8 Gbps per lane, so throughput cannot exceed that electrical ceiling regardless of the drive or controller used.

What clearance and latch space do I need to fit the 50 cm active cable and its connectors?

The 50 cm length suits typical chassis routing, and each end uses a male connector with an active latch that locks into the mating SFF-8611 or SFF-8654 port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.