We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OCuLink SFF-8611 4i to four left-angle SATA 7P connectors, 100CM cable

Vszerda

Vszerda OCuLink SFF-8611 4i to 4 SATA 7P Left Angle 100CM

SKU CH-81SR-MJKA6

Connects an OCuLink SFF-8611 4i host to four SATA drives with 100 cm left-angle cables for tight spaces

  • TypeSAS
  • Length18
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Female
  • FeaturesHigh-speed transfer, left-angle SATA connectors
  • High-speed data transfer between OCuLink 8611 host and four SATA drives
  • Left-angle SATA connectors improve cable routing in tight chassis spaces
  • Durable materials maintain stable connections under continuous operation
  • Flexible 100CM cable simplifies installation for technicians and DIY builders
  • Expands storage by linking four SATA devices to a single 8611 port

Vszerda OCuLink SFF-8611 4i Cable

This cable connects an OCuLink SFF-8611 4i host port to four SATA drives using a single 100 cm assembly. It suits builders adding multiple hard drives or SSDs to a server or workstation where the host controller exposes the SFF-8611 interface. The left-angle SATA plugs help route wires in tight drive cages or shallow chassis.

Upgrade from straight SATA breakout cables

The left-angle connectors remove the bend radius that straight plugs need, so the cable fits where older looms would foul drive bays or side panels. The jump is worth it when chassis depth is limited or when four drives share a cramped backplane and cable routing dictates the build.

Sustained multi-drive transfers

High-speed signalling is maintained across all four lanes during long sequential reads or writes, such as RAID rebuilds or bulk video ingest. The 18 AWG conductors and shielded SAS construction keep signal integrity stable under continuous load rather than only in short benchmarks.

Highlights

  • High-speed data transfer between OCuLink 8611 host and four SATA drives
  • Left-angle SATA connectors improve cable routing in tight chassis spaces
  • Durable materials maintain stable connections under continuous operation
  • Flexible 100CM cable simplifies installation for technicians and DIY builders
  • Expands storage by linking four SATA devices to a single 8611 port

Specifications

BrandST-JY
ModelOCPCSF8611-4-4PST7PL
TypeSAS
Length18
Connector DetailMini Sas
Terminal GenderMale-to-Female
FeaturesHigh-speed transfer, left-angle SATA connectors

Questions about this item

Does the 100CM length give enough slack for a full-tower case?

At 100CM the cable reaches from a rear-mounted OCuLink SFF-8611 4i port to drives in the front bays of most full-tower chassis with room to route behind the motherboard tray.

Which way do the four left-angle SATA 7P connectors point when plugged in?

Each left-angle SATA 7P connector exits toward the left side of the drive, so align the cable so the bend clears adjacent drives or the case wall before latching.

How often should the SFF-8611 4i end be reseated to keep SAS signal integrity?

Reseat the SFF-8611 4i connector only if you notice link errors or after moving the system; the gold-plated contacts are rated for many insertion cycles and do not need periodic maintenance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.