We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black OCuLink SFF-8611 4i male-to-male active cable, 80 cm, 90° down-angled connectors

Vszerda

Vszerda OCuLink SFF-8611 4i Male-Male Active Cable 80cm 90° Down Angled

SKU CH-X215-71EZZ

Active PCIe 4.0 cable carries 64 Gbps between OCuLink SFF-8611 ports, with a 90° down-angled connector for tight spaces

  • TypePCIe
  • ColorBlack
  • Length80
  • Connector Number4
  • Connector DetailPcie
  • Terminal GenderMale-to-Male
  • Fits tight spaces with 90° down-angled connectors
  • Active latch locks securely to mating port
  • 64 Gbps bandwidth carries PCIe 4.0 signals
  • 80 cm length suits external eGPU or SSD setups
  • Dual shielding protects high-speed data integrity

Vszerda OCuLink SFF-8611 4i Active Cable

This 80cm active cable connects two OCuLink SFF-8611 male ports for external GPU or SSD use. It transmits PCI Express 4.0 signals at up to 64Gbps using the OCuLink protocol. The 90-degree down-angled connectors fit tight spaces around female ports. A locking active latch secures each connection.

Check your host has a free OCuLink SFF-8611 female

Verify the device you want to attach also presents an OCuLink SFF-8611 female interface. The cable requires an active PCIe 4.0 link on both ends to reach the rated speed. Ensure your chassis allows the 90-degree connector orientation without blocking adjacent slots. Confirm the 80cm length spans the intended routing path.

Fits external eGPU docks

The angled ends reduce strain where rear-panel clearance is limited. Dual shielding protects the high-speed data path from interference. The active design maintains signal integrity over the full 80cm run. It frees internal drive bays by moving storage or compute outside the case.

Highlights

  • Fits tight spaces with 90° down-angled connectors
  • Active latch locks securely to mating port
  • 64 Gbps bandwidth carries PCIe 4.0 signals
  • 80 cm length suits external eGPU or SSD setups
  • Dual shielding protects high-speed data integrity

Specifications

Brandxiwai
ModelSF-014-DN
TypePCIe
ColorBlack
Length80
Connector Number4
Connector DetailPcie
Terminal GenderMale-to-Male
Speed64 gigabits_per_second
SpecificationsPCIe
ShieldingHigh-Speed Data
FeaturesHigh-Speed Data

Questions about this item

What comes in the box with the Vszerda OCuLink SFF-8611 4i cable and what else is needed?

The box contains the 80 cm active cable with dual 90° down-angled SFF-8611 male connectors and active latches. A host or device with a free OCuLink SFF-8611 female port is required on each end.

Which version of the 80 cm OCuLink cable should I choose for PCIe 4.0 gear?

This model is built for PCIe 4.0 and carries the 64 Gbps rating, so the single 80 cm variant listed is the correct one for current-gen eGPU or SSD enclosures.

What does the 64 Gbps figure mean when the cable is installed in a real system?

It represents the aggregate bandwidth of four PCIe 4.0 lanes carried over the OCuLink link, giving an eGPU or SSD enclosure the full gen-4 x4 throughput the host controller provides.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.