We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OCuLink SFF-8611 4i cable splitting to four right-angle SATA 7P connectors, 100 cm length

Vszerda

Vszerda OCuLink SAS SFF-8611 4i to 4× SATA 7P 90° 100 cm

SKU CH-PMZ5-563W0

Connects an OCuLink SFF-8611 4i host to four SATA drives with 90-degree connectors over 100 cm

  • TypeSAS
  • Length18
  • Connector DetailMini Sas
  • SpecificationsSAS
  • ShieldingHigh-speed transfer, secure connectors
  • FeaturesHigh-speed transfer, secure connectors
  • High-speed data transfer between OCuLink SFF-8611 4i host and four SATA drives
  • Four 90-degree SATA 7P connectors enable flexible storage configurations in tight spaces
  • 100 cm length provides ample reach for internal cable routing
  • Premium materials and shielding deliver durable, stable connections for long-term use
  • User-friendly design allows quick installation by technicians and DIY builders

OCuLink SFF-8611 4i to four SATA 7P

This 100 cm cable connects an OCuLink PCI-Express SFF-8611 4i host port to four SATA devices using 90-degree connectors. It serves builders adding multiple drives to a SAS backplane or HBA without native SATA ports. The right-angle design helps route cables cleanly in dense chassis.

Replaces straight SATA breakout cables

Swapping a rigid straight-connector harness for this 90-degree version frees vertical clearance behind drive bays and improves airflow. The upgrade is worth it when drive cages sit close to the motherboard tray or when cable channels force sharp bends that strain standard plugs.

Fits OCuLink host with four SATA targets

One end plugs into a single SFF-8611 4i receptacle; the other fans out to four SATA 7P data connectors. No extra power leads are included, so each drive still needs its own SATA power source. The 18 cm overall length suits compact servers and workstations where longer runs would create slack.

Highlights

  • High-speed data transfer between OCuLink SFF-8611 4i host and four SATA drives
  • Four 90-degree SATA 7P connectors enable flexible storage configurations in tight spaces
  • 100 cm length provides ample reach for internal cable routing
  • Premium materials and shielding deliver durable, stable connections for long-term use
  • User-friendly design allows quick installation by technicians and DIY builders

Specifications

BrandST-JY
ModelOCPCSFF8611-4-ST7P90D
TypeSAS
Length18
Connector DetailMini Sas
SpecificationsSAS
ShieldingHigh-speed transfer, secure connectors
FeaturesHigh-speed transfer, secure connectors

Questions about this item

What clearance does the 90-degree SATA 7P connector need?

The 90-degree SATA 7P connectors require minimal rear clearance, allowing the cable to route parallel to the drive or backplane in tight chassis spaces.

How is the OCuLink SFF-8611 4i end seated, and what step is often missed?

Align the SFF-8611 4i plug with the host port keying and push until the latch clicks; the step often missed is verifying the latch is fully engaged before routing the cable.

When should this SAS cable be replaced?

Replace the cable if the SFF-8611 4i latch fails to hold, any SATA 7P connector feels loose, or the cable jacket shows kinks or exposed shielding after repeated rerouting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.