We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20 cm Oculink SFF-8611 4i male-to-male cable with braided finish

Vszerda

Vszerda Oculink Cable PCIe 4.0 SFF-8611 4i Male Extension 20 cm

SKU CH-94GH-KGTXY

A 20 cm PCIe 4.0 SFF-8611 4i male-to-male extension cable rated for 16 GT/s over four lanes

  • TypePCIe 4.0
  • ColorBlack
  • Length17.7
  • Connector Number42
  • Connector Detail42 Pin Oculink Sff-8611 Straight
  • Terminal GenderMale-to-Male
  • PCIe 4.0 delivers 16 GT/s across four lanes
  • 20 cm length fits tight mini-PC and eGPU builds
  • SFF-8611 42-pin male-to-male connectors ensure secure link
  • Braided exterior protects cable during daily use
  • Backward compatible with earlier PCIe generations for flexible upgrades

Portable graphics link

This Oculink SFF-8611 cable carries PCIe 4.0 signals at 16 GT/s across four lanes, letting mini PCs and portable devices use external GPU enclosures such as the onexGPU or GPD G1. It targets gamers, artists and editors who need desktop-class graphics throughput without a full-size desktop chassis. The 20 cm male-to-male extension keeps the link short for signal integrity.

Host and enclosure check

Verify that both the host device and the eGPU enclosure expose an Oculink SFF-8611 4i port before ordering. Confirm the enclosure does not already ship with a suitable cable, as many units include one in the box. Ensure the PCIe 4.0 x4 electrical interface is supported on both ends to achieve the rated 16 GT/s transfer rate.

Braided build and daily routing

A protective braided exterior shields the 42-pin conductors from abrasion and repeated flexing in tight spaces. The straight, low-profile connectors sit flush against ports, reducing strain when the enclosure sits close to the host. This construction is rated for daily connect and disconnect cycles typical of portable workstation setups.

Highlights

  • PCIe 4.0 delivers 16 GT/s across four lanes
  • 20 cm length fits tight mini-PC and eGPU builds
  • SFF-8611 42-pin male-to-male connectors ensure secure link
  • Braided exterior protects cable during daily use
  • Backward compatible with earlier PCIe generations for flexible upgrades

Specifications

BrandLetLinkSo
ModelHigh-Speed Oculink SFF-8611 Cable
TypePCIe 4.0
ColorBlack
Length17.7
Connector Number42
Connector Detail42 Pin Oculink Sff-8611 Straight
Terminal GenderMale-to-Male
Speed16 gigabits_per_second
SpecificationsPCIe 4.0

Questions about this item

Does the 20 cm OCuLink cable ship with any adapters or mounting hardware, or is it just the cable?

The package contains only the 0.6 ft SFF-8611 4i male-to-male cable with its braided exterior; no extra adapters, brackets or screws are included.

How do I decide between this 42-pin PCIe 4.0 cable and a longer or differently keyed version for my mini-PC eGPU setup?

Choose this model when the host and the eGPU both expose a straight SFF-8611 4i port and the 20 cm reach fits the chassis; a longer cable or right-angle connector is only needed if the ports are farther apart or angled differently.

What does the 16 GT/s figure mean once the cable is connected between my mini PC and an external GPU enclosure?

It provides a 4-lane PCIe 4.0 link so the external GPU or SSD communicates at the full bus rate the host controller supports, limited only by the device and system implementation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.