We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with gold edge connectors and screw hole

Vszerda

Vszerda NG-SA-068-BKEY 22x30mm to 22x42mm E-Key Extension Adapter internal power cable

SKU CH-031F-KT8AZ

Extends a 2230 E-Key wireless card to 2242 length while protecting its contacts, supporting WIFI6 and WIFI7 modules

  • Connector Number1
  • Protects wireless card contacts with extension adapter
  • Extends 2230 E-Key or A+E-Key cards to 2242 form factor
  • Compatible with WIFI6 and WIFI7 wireless cards
  • E-Key pinout only — not for B-Key, M-Key, A-Key or mini-PCIe
  • PCB adapter card supplied without wireless card

E-Key M.2 2230 to 2242 Extension Adapter

This NGFF adapter extends a 22x30mm E-Key or A+E-Key wireless card to a 22x42mm slot. It accepts WIFI6 and WIFI7 cards and protects the card contacts during installation. The PCB ships without a wireless card included.

Pinout and Form-Factor Constraints

The adapter uses an E-key pinout only and will not function with B-key, M-key or A-key modules. It is also incompatible with mini-PCIe slots. The male-to-female layout bridges the 2230 card to a 2242 motherboard connector without altering the electrical interface.

E-Key Pinout Requirement

The single specification that determines compatibility is the E-key pinout on both the wireless card and the motherboard slot. If either side uses a different key ID the adapter cannot be used.

Highlights

  • Protects wireless card contacts with extension adapter
  • Extends 2230 E-Key or A+E-Key cards to 2242 form factor
  • Compatible with WIFI6 and WIFI7 wireless cards
  • E-Key pinout only — not for B-Key, M-Key, A-Key or mini-PCIe
  • PCB adapter card supplied without wireless card

Specifications

BrandNGFF
ModelNG-SA-068-BKEY
Connector Number1

Questions about this item

Which version fits a 2230 E-Key wireless card?

The NG-SA-068-BKEY adapter converts a 22x30 mm E-Key or A+E-Key card to a 22x42 mm slot. It does not work with B-Key, M-Key, A-Key or mini-PCIe.

Will this adapter affect WIFI6 or WIFI7 performance?

The adapter is a passive PCB extension. It carries the E-Key pinout without active components, so signal quality matches the host slot and card capabilities.

What interface standard does the E-Key pinout follow?

The adapter uses the NGFF E-Key pinout for 2230 to 2242 extension. It supports WIFI6 and WIFI7 wireless cards that conform to that keying.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.