We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with two vertical SATA ports and an M.2 Key B+M edge connector

Vszerda

Vszerda NF-SA-043 SATA cable dual port vertical JMB582

SKU CH-1MY9-M76JA

Adds two vertical SATA 6.0 Gbps ports to an NGFF Key B+M slot for 2230 to 2280 drives with JMB582 controller

  • Conductorcopper
  • Dual SATA 3.0 ports deliver up to 6.0 Gbps throughput
  • JMB582 controller enables native command queuing for sustained performance
  • Hot-swap support lets you change drives without powering down
  • Fits NGFF Key B+M slots sized 2230 2242 2260 2280
  • Copper conductors ensure reliable signal integrity across all speeds

Dual-Port SATA Adapter for M.2 Key B+M Slots

This Vszerda NF-SA-043 adapter converts an NGFF Key B+M PCI Express slot into two vertical SATA 3.0 ports. It uses the JMB582 controller to provide 6.0 Gbps, 3.0 Gbps and 1.5 Gbps transfer rates. The card accepts 2230, 2242, 2260 and 2280 form-factor modules. Copper conductors ensure reliable signal integrity.

Suits builders adding SATA SSDs to an M.2 slot

Ideal for systems with a free Key B+M M.2 socket that need extra SATA storage. Native command queuing and error correction keep drives stable under load. Hot-swap and power-management features simplify drive changes. Not for users whose motherboard lacks a Key B+M M.2 connector or who require more than two SATA ports.

JMB582 controller enables dual SATA 6 Gbps links

The JMB582 chip is the single specification that determines compatibility and throughput. It delivers two independent SATA 3.0 channels at up to 6.0 Gbps each. Support for Gen1 through Gen3 signalling ensures backward compatibility with older drives. Verify your slot is Key B+M PCI Express before purchase.

Highlights

  • Dual SATA 3.0 ports deliver up to 6.0 Gbps throughput
  • JMB582 controller enables native command queuing for sustained performance
  • Hot-swap support lets you change drives without powering down
  • Fits NGFF Key B+M slots sized 2230 2242 2260 2280
  • Copper conductors ensure reliable signal integrity across all speeds

Specifications

BrandVszerda
ModelNF-SA-043
Conductorcopper

Questions about this item

Will the vertical SATA ports on this NF-SA-043 adapter clear a low-profile bracket in an M.2 2280 slot?

The card uses a vertical SATA interface that extends upward from the NGFF Key B+M slot; measure the clearance above your motherboard to confirm the 2280 form factor fits.

Do I need to enable any BIOS setting for the JMB582 controller to detect both SATA SSDs during installation?

Insert the adapter into a Key B+M PCI Express slot, connect the SSDs to the two vertical SATA3.0 ports, then ensure the motherboard BIOS is set to AHCI mode for the controller.

If one of the dual SATA ports stops negotiating 6.0Gbps, what part should I check first?

Inspect the copper SATA cable and port for bent pins or dust; the JMB582 supports Gen1i through Gen3i speeds, so a drop to 1.5Gbps usually indicates a physical connection issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.