We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small aluminium box with HDMI ports on each side

Vszerda

Vszerda MT-S182 1×2 HDMI Splitter 8K 60Hz 4K 120Hz 40Gbps

SKU CH-0K6Z-EHJ9C

Mirrors one HDMI source to two displays at up to 8K 60Hz or 4K 120Hz with 40Gbps bandwidth and HDCP 2.3 support

  • Mirrors one 8K source to two displays at 60 Hz
  • Delivers 4K gaming at 120 Hz on both outputs
  • 40 Gbps bandwidth handles uncompressed 8K 4:4:4 video
  • Powered splitter drives cables up to 26 ft total length
  • HDCP 2.3 and EDID management keep protected content playing

1×2 HDMI Splitter for 8K Displays

The Vszerda MT-S182 duplicates a single HDMI 2.1 source across two screens at up to 8K 60Hz or 4K 120Hz. It is built for installers and enthusiasts who need identical output on dual monitors or projectors. An aluminium shell provides passive cooling and durability in fixed installations.

Not a Switch — Mirror Only

This unit cannot combine two sources into one display; it only mirrors one source to two outputs. If connected monitors report different maximum resolutions, both outputs drop to the lower common format. The jump from a passive Y-cable is worth it when runs exceed short desk lengths or when HDCP 2.3 handshakes must remain stable.

40 Gbps Bandwidth with 26 ft Reach

The 40 Gbps throughput handles 8K 60Hz 4:4:4, 4K 120Hz, VRR and high-bitrate audio formats such as DTS-HD and Dolby TrueHD. Signal transmission is specified for up to 26 ft total with 16 ft input and 10 ft output cables. Beyond that distance or with non-2.1-rated cables the link will fall back to lower resolutions.

Highlights

  • Mirrors one 8K source to two displays at 60 Hz
  • Delivers 4K gaming at 120 Hz on both outputs
  • 40 Gbps bandwidth handles uncompressed 8K 4:4:4 video
  • Powered splitter drives cables up to 26 ft total length
  • HDCP 2.3 and EDID management keep protected content playing

Specifications

No published specifications for this item yet.

Questions about this item

What cable lengths does the MT-S182 support for reliable 8K 60Hz or 4K 120Hz transmission?

The splitter supports up to 16 ft on the input side and 10 ft on each output, with a total cascade distance of 26 ft when using certified 40 Gbps HDMI 2.1 cables.

Which step do users often miss when installing the MT-S182 for the first time?

Connecting the included DC 5 V power adapter before linking any source or display; the unit will not pass a stable 40 Gbps signal without external power.

When would the MT-S182 itself need to be replaced rather than just the cables or power supply?

If the aluminium chassis is bent, the HDMI ports are physically damaged, or the internal EDID logic fails to handshake at 8K 60 Hz or 4K 120 Hz after verified-good cables and power are used.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.