We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold mSATA edge connector and black 22-pin SATA socket

Vszerda

Vszerda mSATA to SATA 3.0 22Pin 2.5" Hard Drive Adapter

SKU CH-WR7M-Y80AF

Converts an mSATA SSD to a 2.5" SATA 6.0 Gb/s drive without speed loss

  • Converts mSATA SSDs to 2.5" SATA 6.0 Gb/s drives
  • Compact 71 x 53 x 5.0 mm PCBA fits tight spaces
  • Works with DOS, Windows 98 through Win7, Mac OS and Linux
  • Maintains full SATA 6.0 Gb/s speed after conversion
  • Weighs just 0.01 kg for lightweight portable builds

mSATA to SATA 3.0 Adapter

This Vszerda adapter converts an mSATA solid-state drive into a standard 2.5-inch SATA form factor. It allows you to install an mSATA SSD into a drive bay or enclosure that accepts a 22-pin SATA connection. The board measures 71 by 53 by 5.0 millimetres and weighs 0.01 kilograms.

Sustained Operation

The adapter maintains the native SATA 6.0 Gb/s interface speed of the installed mSATA SSD without degradation during extended use. It operates passively with no active cooling required across supported operating systems including DOS, Windows 98 through 7, Mac OS, and Linux. The PCBA design ensures stable electrical continuity for continuous read and write workloads.

Compatibility Check

Verify your source drive uses an mSATA connector; this adapter is not compatible with 50mm Mini PCI-e SATA or Mini PCI-e PATA devices. Confirm your target system provides a standard 22-pin SATA data and power connection for the 2.5-inch form factor. No additional drivers are required for the listed operating systems.

Highlights

  • Converts mSATA SSDs to 2.5" SATA 6.0 Gb/s drives
  • Compact 71 x 53 x 5.0 mm PCBA fits tight spaces
  • Works with DOS, Windows 98 through Win7, Mac OS and Linux
  • Maintains full SATA 6.0 Gb/s speed after conversion
  • Weighs just 0.01 kg for lightweight portable builds

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda mSATA-to-SATA adapter add any heat or power draw when running continuously?

The passive PCBA measures 71 by 53 by 5.0 millimetres and has no active components, so it adds negligible heat or power consumption.

What drive and cable must I already own for this 22-pin adapter to work?

You need an mSATA SSD with a standard mSATA connector and a 2.5-inch SATA data-plus-power cable or drive bay.

Will the adapter slow down an older SATA 3.0 Gb/s drive I keep in the same system?

The board supports SATA 6.0 Gb/s and does not change the speed of the converted mSATA SSD, so legacy SATA devices run at their own rated speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.