We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and a blue USB cable attached

Vszerda

Vszerda mSATA & M.2 SATA USB Adapter 2230/2242/2260/2280

SKU CH-A23W-M9MPP

Connects half- and full-size mSATA or M.2 SATA SSDs (2230, 2242, 2260, 2280) to USB 2.0 with a 67x98 mm adapter board and LED power indicator

  • Connect half and full-size mSATA SSDs via USB
  • Use M.2 Key B SATA SSDs in 2230, 2242, 2260, 2280 sizes
  • Driver-free operation on any operating system
  • LED shows power status at a glance
  • Includes SATA-to-USB 2.0 cable and mounting bracket

Universal SATA SSD Adapter

This Vszerda adapter connects half-size or full-size mSATA SSDs and NGFF M.2 Key B SATA SSDs to a USB port. It accepts four M.2 lengths — 2230, 2242, 2260 and 2280 — so one board covers the common form factors. The device is transparent to the operating system and requires no driver installation. It suits technicians and hobbyists who need quick external access to SATA-based solid-state storage.

Low-Power USB 2.0 Operation

The adapter draws power from the included SATA-to-USB 2.0 cable and uses a Hi-Speed SATA 6 Gbps mass-storage interface behind the USB 2.0 link. An on-board LED shows power status at a glance. Because the USB 2.0 bus limits throughput, sustained transfers will run at USB 2.0 speeds rather than the SATA bus maximum. The compact 67 x 98 mm PCB adds minimal bulk to a test bench or travel kit.

Ready-to-Use Accessory Kit

The package supplies a SATA-to-USB 2.0 cable, a minicard extender bracket, a screwdriver and four mounting screws alongside the adapter board. The bracket lets you secure half-size mSATA modules firmly, while the screws fit the M.2 standoffs on the board. No additional cables or tools are required to start reading or writing supported SSDs immediately.

Highlights

  • Connect half and full-size mSATA SSDs via USB
  • Use M.2 Key B SATA SSDs in 2230, 2242, 2260, 2280 sizes
  • Driver-free operation on any operating system
  • LED shows power status at a glance
  • Includes SATA-to-USB 2.0 cable and mounting bracket

Specifications

No published specifications for this item yet.

Questions about this item

How do I install an M.2 2280 SATA SSD into this adapter and what step is often missed?

Insert the SSD into the M.2 slot at a 30-degree angle, press down, and secure it with the supplied screw; the step often missed is using the correct standoff position for the 2280 length so the screw thread engages.

What maintenance or replacement will this adapter need over time?

The USB 2.0 cable and the SATA-to-USB bridge board are the only parts that can wear out; the PCB itself has no moving components and the LED simply shows power status.

What limit appears first when I copy large files continuously through this adapter?

The USB 2.0 cable caps sustained transfer speed at its own maximum, well below the adapter's SATA 6 Gbps capability.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.