We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mini SAS cable SFF-8087 to four SATA connectors 40 in

Vszerda

Vszerda mSAS Cable SFF-8087 to 4 SATA 40 in

SKU CH-1ZZ4-7W395

Connects a mini SAS SFF-8087 port to four SATA drives using a 40 in cable

  • Typemini SAS
  • ColorBlack
  • Length40
  • FeaturesData Transfer
  • Connects SFF-8087 controller to four SATA drives
  • 40 inch length fits full-height server chassis
  • Straight-through wiring keeps signal path clean
  • Black jacket resists abrasion in dense racks
  • Supports SAS and SATA backplane configurations

Connection Layout

This Vszerda cable breaks out a single SFF-8087 mini-SAS port into four individual SATA connectors. It lets a SAS or RAID controller talk to up to four SATA hard drives or a backplane in a server or storage chassis. The 40-inch length gives routing room inside larger cases or rack-mount enclosures.

Who It Fits

Builders adding SATA drives to a controller that only exposes mini-SAS ports will find the right pin-out here. It does not suit systems whose controller uses a different mini-SAS variant, installations that need a shorter or longer reach, or setups that require native SAS device connectors instead of SATA plugs.

Deciding Spec

The cable carries an SFF-8087 plug on one end and four SATA data connectors on the other, so the only compatibility check is whether the host side presents that exact mini-SAS interface.

Highlights

  • Connects SFF-8087 controller to four SATA drives
  • 40 inch length fits full-height server chassis
  • Straight-through wiring keeps signal path clean
  • Black jacket resists abrasion in dense racks
  • Supports SAS and SATA backplane configurations

Specifications

BrandMITATTOK
Model8087Sto4*SATA
Typemini SAS
ColorBlack
Length40
FeaturesData Transfer

Questions about this item

What does the 40 in length mean once the cable is routed inside a chassis?

It gives you a one-metre run from the controller bracket to the drive backplane, with enough slack for cable-management channels and a gentle bend radius.

How does the SFF-8087 interface limit the SATA connections?

The mini-SAS plug carries four lanes, so each of the four SATA ends runs at single-lane SATA speed; the link will not exceed the controller's SAS lane rate.

What clearance does the SFF-8087 connector need behind the bracket?

The straight mini-SAS plug requires roughly 40 mm of depth behind the bracket for the latch to seat without stress on the PCB.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.