We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex to four fan connector splitter cable 10 inch

Vszerda

Vszerda Molex to 2×3/4-pin fan sleeved splitter cable 10 inch black

SKU CH-5WYR-QJ0AM

Connects two 3-pin or 4-pin PWM fans to a single 12 V Molex supply using a 10 inch black-sleeved 22 AWG cable

  • Connects two fans from one Molex PSU output
  • Black sleeved jacket protects 100 % copper 22 AWG wires
  • 10 inch length fits compact and full-size cases
  • 12 V Molex LP4 male to four female fan headers
  • Only two pins energised so fans run at full constant speed

Vszerda Molex fan splitter cable

This 10 inch adapter converts a single Molex LP4 power connector into four fan headers, letting one PSU lead run up to four 3-pin or 4-pin case fans. It is aimed at builders who need extra fan connections without using motherboard headers.

Power delivery and control limits

The cable draws 12 V directly from the PSU through standard UL 1007 22 AWG copper wire, so fan speed is fixed at full voltage. Only two pins per header are energised, meaning PWM control and automatic throttling are not available regardless of the fan model.

Sleeved build and connector layout

A black sleeved jacket covers the 100 % copper conductors for durability and a clean look inside the case. The four female connectors are spaced along the Y-splitter, letting you route each fan to its mount while the single Molex male plug seats firmly in the PSU cable.

Highlights

  • Connects two fans from one Molex PSU output
  • Black sleeved jacket protects 100 % copper 22 AWG wires
  • 10 inch length fits compact and full-size cases
  • 12 V Molex LP4 male to four female fan headers
  • Only two pins energised so fans run at full constant speed

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 10-inch length or look for a longer cable?

The cable is 10 inches long; choose it if that reach fits your case layout, otherwise a longer cable would be needed.

What does the 12 V Molex rating mean once the cable is installed?

It draws 12 V power directly from the PSU Molex connector, so both fans run at full 12 V speed with no motherboard speed control.

How does the Molex LP4 to 3-pin/4-pin interface limit fan control in practice?

Only two pins are energised on each fan header, so PWM or voltage-based speed control is not possible; fans spin at constant 12 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.