We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Molex 4-pin male to three SATA 15-pin female power splitter cable 16.6in 18AWG tinned copper

Vszerda

Vszerda Molex 4 PIN to 3 x SATA 15 PIN Power Cable 16.6in 18AWG Tinned Copper

SKU CH-GS3Z-23DZR

Converts a single Molex 4-pin connector into three SATA 15-pin power connectors using 18AWG tinned copper cable, 16.6in long

  • Type18awg
  • LengthAWM 1007 18AWG 300V
  • Terminal GenderFemale-to-Female
  • Powers three drives from one Molex connector using 18AWG tinned copper wire
  • 6 inch length allows flexible routing inside PC or server cases
  • 18AWG gauge reduces voltage drop for stable power delivery to each device
  • Black side-by-side cable design keeps wiring tidy and improves airflow
  • LP4 male supplies +5 V and +12 V rails to three SATA 15-pin females

Power Expansion for Multiple Drives

This Molex-to-SATA cable converts a single 4-pin LP4 connector into three 15-pin SATA power connectors. It suits PC, NAS or server builders who need to add mechanical hard drives or SSDs without extra power-supply leads. The 16.6in length and side-by-side 18AWG tinned-copper wires keep routing tidy inside crowded chassis. Each SATA device draws from the shared +5 V and +12 V rails.

Simple Install, Watch the Current

Plug the male Molex end into a free LP4 header, then attach up to three SATA drives; power off the system first as the caution states. The 18AWG gauge limits voltage drop, but the single LP4 source caps total output at 25 W on +5 V and 60 W on +12 V. Overloading that rail with high-spin-up drives can cause instability or connector melt.

Check Your Power Budget First

Verify your power supply has a spare Molex 4-pin lead and that the combined draw of all attached drives stays within the 25 W and 60 V rail limits. Confirm each drive uses a standard 15-pin SATA power socket — some enterprise or specialty units differ. Ensure the 16.6in reach spans from the PSU lead to the furthest drive bay without strain.

Highlights

  • Powers three drives from one Molex connector using 18AWG tinned copper wire
  • 6 inch length allows flexible routing inside PC or server cases
  • 18AWG gauge reduces voltage drop for stable power delivery to each device
  • Black side-by-side cable design keeps wiring tidy and improves airflow
  • LP4 male supplies +5 V and +12 V rails to three SATA 15-pin females

Specifications

BrandELFJMZP
Type18awg
LengthAWM 1007 18AWG 300V
Terminal GenderFemale-to-Female

Questions about this item

How can I confirm the cable is delivering stable power to all three drives after installation?

Verify each connected drive spins up and is recognised by the BIOS or operating system without intermittent disconnects.

What comes in the package and do I need any extra connectors or adapters?

The box contains one 16.6 inch black cable with a Molex 4 PIN male plug and three SATA 15 PIN female sockets; no additional parts are required if your power supply has a free Molex connector.

Which length and wire gauge should I choose for a typical desktop or server build?

This model is 16.6 inches long and uses 18AWG tinned copper conductors rated for 300V, suitable for most internal drive expansions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.