We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF-8643 to four right-angle SATA cables, multicolored, 100CM

Vszerda

Vszerda MNSFF8643-4PSTR Mini SAS HD SFF-8643 to 4 SATA Right Angle Cable 100CM

SKU CH-C236-38G7K

Connects a Mini SAS HD SFF-8643 port to four right-angle SATA drives at 12Gbps with EMI shielding

  • TypeMINI SAS to SATA
  • ColorMulticolored
  • Length18
  • Connector DetailMini Sas Hd Sff-8643 to Sata 7p
  • Terminal GenderMale-to-Male
  • SpecificationsMINI SAS to SATA
  • 12Gbps SAS 3.0 bandwidth powers high-performance storage arrays
  • Right-angle SATA connectors with locking clips stay secure in dense chassis
  • Advanced EMI shielding prevents signal loss in enterprise environments
  • 100cm length gives flexible routing between backplanes and drives
  • Male-to-male SFF-8643 to four SATA 7-pin links RAID controllers to SATA disks

Server storage connectivity

The Vszerda Mini SAS HD SFF-8643 cable links a SAS backplane or RAID controller to four SATA drives in enterprise servers. It delivers 12Gbps throughput under SAS 3.0 and PCI-E 4.0 standards for high-speed storage clusters and virtualization workloads.

Compatibility check

Verify that your backplane or controller provides an SFF-8643 Mini SAS HD port and that each target drive uses a standard SATA 7-pin connector. The right-angle SATA ends require sufficient clearance behind the drive bays for the 18-inch breakout length.

Thermals and power

Advanced EMI shielding protects signal integrity without active cooling, so the cable adds no noise or heat to the chassis. Passive construction draws no power and relies on the locking connectors to maintain stable contact in high-vibration environments.

Highlights

  • 12Gbps SAS 3.0 bandwidth powers high-performance storage arrays
  • Right-angle SATA connectors with locking clips stay secure in dense chassis
  • Advanced EMI shielding prevents signal loss in enterprise environments
  • 100cm length gives flexible routing between backplanes and drives
  • Male-to-male SFF-8643 to four SATA 7-pin links RAID controllers to SATA disks

Specifications

BrandST-JY
ModelMNSFF8643-4PSTR
TypeMINI SAS to SATA
ColorMulticolored
Length18
Connector DetailMini Sas Hd Sff-8643 to Sata 7p
Terminal GenderMale-to-Male
SpecificationsMINI SAS to SATA
ShieldingAdvanced EMI shielding, right-angle SATA connectors, heavy-duty durability for enterprise applications
FeaturesAdvanced EMI shielding, right-angle SATA connectors, heavy-duty durability for enterprise applications

Questions about this item

What connectors are on the Vszerda MNSFF8643-4PSTR cable and do I need any extra parts?

The cable has a Mini SAS HD SFF-8643 plug on one end and four right-angle SATA 7-pin plugs on the other. No additional adapters are required for a direct backplane-to-drive link.

Which length should I choose for a typical 2U server chassis?

The cable is 100 cm long, which spans the depth of most 2U and 4U enclosures while leaving slack for cable management.

What does the 12 Gbps SAS 3.0 rating mean for my RAID array?

Each of the four SATA lanes runs at up to 12 Gbps, matching the SAS 3.0 spec so your RAID controller can saturate every connected drive without bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.