We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Multicoloured Mini SAS HD SFF-8087 to four right-angle SATA cables, 50 cm

Vszerda

Vszerda MNSFF8087-4PSTR Mini SAS HD SFF-8087 to 4 SATA Right Angle 50CM

SKU CH-RCBE-J1KBE

Connects a Mini SAS HD SFF-8087 host to four SATA drives with right-angle connectors, EMI shielding and 6 Gbps support for dense server racks

  • TypeMINI SAS
  • ColorMulticolored
  • Length18
  • Connector DetailMini Sas Hd Sff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • SpecificationsMINI SAS
  • Right-angle connectors enable tidy routing in tight 18 cm spaces
  • EMI shielding protects 6 Gbps SATA signals from interference
  • Mini SAS HD SFF-8087 links to four SATA 7P drives
  • 50 cm length suits dense server racks and RAID arrays
  • Male-to-male terminals provide secure host-to-drive connections

Mini SAS HD SFF-8087 to 4 SATA Cable

The Vszerda MNSFF8087-4PSTR is a 50 cm Mini SAS HD SFF-8087 to four SATA 7P right-angle cable built for enterprise storage links. It connects a single Mini SAS HD host port to up to four SATA drives in RAID arrays, NAS units and dense server racks. Right-angle ends and EMI shielding keep routing tidy and signals stable in high-vibration chassis.

Suited for RAID, NAS and dense server builds

Installers who need a compact, shielded breakout from one Mini SAS HD SFF-8087 port to four SATA devices will find the length and right-angle geometry fit tight bays. Builders requiring longer runs, straight connectors or a different host interface should select another cable.

Single Mini SAS HD SFF-8087 host connector

The cable presents one SFF-8087 plug on the controller side and four SATA 7P plugs on the drive side. Verify that your RAID card or backplane exposes exactly this port before ordering.

Highlights

  • Right-angle connectors enable tidy routing in tight 18 cm spaces
  • EMI shielding protects 6 Gbps SATA signals from interference
  • Mini SAS HD SFF-8087 links to four SATA 7P drives
  • 50 cm length suits dense server racks and RAID arrays
  • Male-to-male terminals provide secure host-to-drive connections

Specifications

BrandST-JY
ModelMNSFF8087-4PSTR
TypeMINI SAS
ColorMulticolored
Length18
Connector DetailMini Sas Hd Sff-8087 to 4x Sata
Terminal GenderMale-to-Male
SpecificationsMINI SAS
ShieldingRight-angle connectors, EMI shielding for stability, high-speed SATA data support up to 6Gbps
FeaturesRight-angle connectors, EMI shielding for stability, high-speed SATA data support up to 6Gbps

Questions about this item

Will the right-angle SATA connectors need replacing after repeated drive swaps in a RAID array?

The cable uses male-to-male SATA 7P right-angle connectors rated for standard insertion cycles; treat them as a permanent link and avoid frequent unplugging to maintain signal integrity.

What limits sustained throughput when four SATA drives run at 6Gbps through the Mini SAS HD SFF-8087 link?

The SFF-8087 host port aggregates four 6Gbps SATA lanes, so total bandwidth is shared across all drives; the host controller and backplane become the practical ceiling.

How much heat does the cable add inside a 1U server running all day?

Passive copper construction with EMI shielding produces negligible heat; thermal load comes from the drives and controller, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.