We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MiniSAS SFF-8087 straight connector branching to four right-angle SATA plugs on 0.5 m cable

Vszerda

Vszerda MiniSAS SFF-8087 to 4x SATA Cable 0.5 m 6 Gbps

SKU CH-HK96-FT2NM

Connects four SATA drives to an SAS controller with a 0.5 m forward breakout cable supporting 6 Gbps per channel

  • TypeSAS to SATA
  • Color1PC
  • Length0.5
  • Connector Number36
  • Connector DetailSff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • Connect four SATA drives to one SAS controller
  • 6 Gbps per channel for fast data transfer
  • 5 m length suits compact server builds
  • Right-angle SATA plugs ease tight drive-bay routing
  • AWG30 twinaxial 8-pair wire ensures signal integrity

Straight-to-Right-Angle Breakout Cable

This new Vszerda MiniSAS SFF-8087 fan-out cable connects a single SAS controller port to four SATA drives inside a server or storage enclosure. The 0.5-metre length suits tight chassis routing where a short reach keeps airflow clear. It is built for administrators who need reliable 6 Gbps links between a host adapter and direct-attached SATA storage.

Installation Notes

The SFF-8087 plug inserts straight into the controller while each SATA connector angles right, so cable dress follows the drive bay edge without sharp bends. AWG30 twinaxial pairs are stiff; forcing a tight radius can kink the dielectric and raise skew. Verify the controller bracket clears the right-angle bodies before latching, and seat each SATA plug fully to avoid intermittent detection.

Pre-Order Checks

Confirm the controller presents a standard SFF-8087 receptacle and that the enclosure drives use SATA data ports, not SAS-only backplanes. The cable is a forward breakout — host on the SAS end, drives on the SATA end — so it will not work in a reverse topology. Ensure the 100 Ohm impedance matches the controller specification and that 0.5 metres reaches from the card slot to the furthest drive bay.

Highlights

  • Connect four SATA drives to one SAS controller
  • 6 Gbps per channel for fast data transfer
  • 5 m length suits compact server builds
  • Right-angle SATA plugs ease tight drive-bay routing
  • AWG30 twinaxial 8-pair wire ensures signal integrity

Specifications

Brand10Gtek
TypeSAS to SATA
Color1PC
Length0.5
Connector Number36
Connector DetailSff-8087 to 4x Sata
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsSAS to SATA
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

How can I verify the SFF-8087 to 4x SATA cable is functioning correctly after installation?

The system BIOS or RAID controller utility should detect all four connected SATA drives at up to 6 Gbps per channel without errors.

What comes with the Vszerda MiniSAS cable and what must I source separately?

The package includes the 0.5 m AWG30 twinaxial breakout cable with a straight SFF-8087 plug and four right-angle SATA connectors; you must provide the SAS controller and SATA drives.

Which version of this breakout cable should I choose for a standard internal RAID controller?

Select the forward breakout SFF-8087 to 4x SATA model with straight-to-right-angle ends for direct host-to-drive connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.