We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MiniSAS SFF-8087 male plug splitting into four SATA male connectors on a short flat cable

Vszerda

Vszerda MiniSAS SFF-8087 Fan-Out to 4xSATA 0.5m

SKU CH-EQ65-FK6S2

Connects a MiniSAS SFF-8087 controller to four SATA drives at up to 6Gbps per channel using 0.5m AWG30 twinax cable

  • TypeInternal Mini SAS HD Cable
  • Color1PC
  • Length0.5
  • Connector Number36
  • Connector DetailSff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • Connect 4 SATA drives to a SAS controller via SFF-8087
  • 6 Gbps per channel for high-speed data transfer
  • AWG30 twinaxial 8-pair wire ensures low-skew signal integrity
  • 100-Ohm impedance maintains reliable internal connectivity
  • 5 m length suits compact server and storage enclosures

Vszerda MiniSAS SFF-8087 Breakout Cable

This 0.5m internal cable connects a single MiniSAS SFF-8087 port to four SATA drives. It is built for RAID controllers, servers and storage enclosures that need to link multiple SATA devices through one SAS interface. The male-to-male design uses AWG30 twinaxial 8-pair wiring with 100-Ohm impedance.

Sustained 6Gbps per channel data transfer

Each of the four channels supports up to 6Gbps bandwidth for continuous throughput. The low-skew twinaxial construction maintains signal integrity across the 0.5m length under steady workloads. Unidirectional transmission means the cable only carries data from the SAS controller to SATA targets, not the reverse.

Simple internal routing with random SATA clip style

The short 1.6ft length keeps cable management tidy inside chassis and backplanes. SATA connectors ship with or without locking clips at random, so installers should verify retention method matches their drive bays. The 36-pin SFF-8087 end plugs directly into compatible SAS controller cards without adapters.

Highlights

  • Connect 4 SATA drives to a SAS controller via SFF-8087
  • 6 Gbps per channel for high-speed data transfer
  • AWG30 twinaxial 8-pair wire ensures low-skew signal integrity
  • 100-Ohm impedance maintains reliable internal connectivity
  • 5 m length suits compact server and storage enclosures

Specifications

Brand10Gtek
TypeInternal Mini SAS HD Cable
Color1PC
Length0.5
Connector Number36
Connector DetailSff-8087 to 4x Sata
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsInternal Mini SAS HD Cable
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

Does the SFF-8087 fan-out cable generate noticeable heat or draw extra power when running all day?

The cable is a passive twinaxial assembly with 100-Ohm impedance; it adds no active circuitry so heat and power draw are negligible.

What must my controller provide for the SFF-8087 end to work?

Your SAS controller or RAID card needs a standard SFF-8087 port; the cable plugs straight in with male-to-male terminals.

Will the 0.5 m length reach drives in a typical server chassis alongside older SATA backplanes?

At 1.6 ft the fan-out is designed for tight internal routing; SATA connectors may ship with or without locking clips.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.