Vszerda
Vszerda MiniSAS SFF-8087 Fan-Out Cable Breakout to 4xSATA 6Gbps 0.8m
Connects a 36-pin SFF-8087 port to four SATA drives at 6 Gbps per channel over 0.8 m
- TypeInternal Mini SAS HD Cable
- Color1PC
- Length0.8
- Connector Number64
- Connector DetailSff-8087 to 4x Sata
- Terminal GenderMale-to-Male
- Connect RAID controllers to four SATA drives via SFF-8087 host port
- 6 Gbps per channel supports fast storage throughput
- 100 Ohm impedance maintains signal integrity across the link
- Low-profile SATA connectors with steel latches resist vibration disconnects
- P1–P4 markers simplify port identification after installation
MiniSAS SFF-8087 Breakout Cable
This new Vszerda cable splits a single internal MiniSAS SFF-8087 host port into four SATA 6Gbps device connections. It is built for servers, RAID controllers and storage enclosures that use a 36-pin SFF-8087 interface to attach SATA drives or backplanes.
Suits direct-attached SATA drives.
The cable works when the controller or motherboard provides the MiniSAS SFF-8087 host side and the targets are SATA drives or a SATA backplane. It will not suit builds where the host connector is SATA and the target requires a MiniSAS plug, nor configurations that need an external MiniSAS interface.
0.8 m length with 100 Ohm impedance
Each of the four channels supports up to 6 Gbps across a 100 Ohm differential pair. The 0.8 metre ribbon assembly uses acetate cloth tape and a woven mesh sheath for strain relief and easier routing inside a chassis.
Highlights
- Connect RAID controllers to four SATA drives via SFF-8087 host port
- 6 Gbps per channel supports fast storage throughput
- 100 Ohm impedance maintains signal integrity across the link
- Low-profile SATA connectors with steel latches resist vibration disconnects
- P1–P4 markers simplify port identification after installation
Specifications
| Brand | 10Gtek |
|---|---|
| Model | CB-001 |
| Type | Internal Mini SAS HD Cable |
| Color | 1PC |
| Length | 0.8 |
| Connector Number | 64 |
| Connector Detail | Sff-8087 to 4x Sata |
| Terminal Gender | Male-to-Male |
| Speed | 6 gigabits_per_second |
| Specifications | Internal Mini SAS HD Cable |
| Shielding | Data Transfer |
| Features | Data Transfer |
Questions about this item
What host connector must my RAID controller or motherboard provide for this cable to work?
The cable requires a 36-pin SFF-8087 port on the host side to connect to a RAID controller or motherboard.
Will the 6 Gbps channels on this cable still operate correctly with older 3 Gbps SATA drives I plan to keep?
Yes, each 6 Gbps channel is backward compatible and will negotiate down to 3 Gbps with older SATA drives.
How can I verify each drive is linked at the correct speed after I connect the four SATA ends?
Check the RAID controller BIOS or OS disk utility; each of the four P1–P4 lanes should report a 6 Gbps link when a 6 Gbps drive is attached.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115231BTC
In stock
