We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short blue cable with SFF-8644 connectors on both ends

Vszerda

Vszerda Mini SAS SFF-8644 to SFF-8644 Cable 0.5M

SKU CH-C3CJ-A7JDS

External Mini SAS SFF-8644 cable, 0.5 m, 12 Gb/s, shock-resistant, male-to-male connectors

  • TypeSFF-8644
  • ColorSFF-8644 to SFF-8644
  • Length0.5
  • Connector Number16
  • Connector DetailSff-8644
  • Terminal GenderMale-to-Male
  • Supports 12 Gb/s SAS throughput for high-speed server storage
  • SFF-8644 connectors comply with SAS 2.1 and upcoming 3.0 specifications
  • Male-to-male design links RAID controllers and enclosures directly
  • Shock-resistant shielding protects signal integrity in dense racks
  • Half-metre length keeps cable runs tidy in compact chassis

SFF-8644 12 Gb/s cable, 0.5 m

This Vszerda cable carries 12 Gb/s SAS traffic between two SFF-8644 ports. The 0.5 metre length suits rack-mounted servers or direct-attached storage shelves where devices sit close together. Shielded, shock-resistant construction protects signal integrity in dense chassis. Male-to-male connectors lock securely into HBAs, RAID controllers or backplanes.

Suits short-run 12 Gb/s links.

Administrators wiring HBAs to JBODs inside the same rack will find the half-metre reach convenient and tidy. Builders who need to span multiple racks or connect floor-standing arrays should select a longer cable. The fixed 0.5 m length cannot be extended without adding connectors that would degrade the 12 Gb/s margin.

12 Gb/s rated SFF-8644 interface

The cable meets the SAS 2.1 High Density specification and is forward-compatible with the SAS 3.0 12 Gb/s standard. Each assembly carries 16 differential lanes across the SFF-8644 x4 interface. If the host or target device only supports 6 Gb/s SAS, the link will negotiate down, but the cable itself is qualified for the full 12 Gb/s rate.

Highlights

  • Supports 12 Gb/s SAS throughput for high-speed server storage
  • SFF-8644 connectors comply with SAS 2.1 and upcoming 3.0 specifications
  • Male-to-male design links RAID controllers and enclosures directly
  • Shock-resistant shielding protects signal integrity in dense racks
  • Half-metre length keeps cable runs tidy in compact chassis

Specifications

Brandchenyang
ModelCY-SF-069-0.5M
TypeSFF-8644
ColorSFF-8644 to SFF-8644
Length0.5
Connector Number16
Connector DetailSff-8644
Terminal GenderMale-to-Male
Speed12 gigabits_per_second
SpecificationsSFF-8644
Shieldingshock-resistant
Featuresshock-resistant

Questions about this item

What SAS host adapter port does the SFF-8644 plug into?

The cable ends in male SFF-8644 connectors that mate with an external 12 Gb/s SAS HD Mini-SAS x4 port on a RAID controller or HBA.

Will the 0.5 m cable reach between a 2.5-inch drive enclosure and a full-height PCIe card in the same chassis?

At half a metre the cable suits tight intra-chassis routing; measure your specific card-to-bay distance before ordering.

How can I confirm the link is running at 12 Gb/s after installation?

Check the controller BIOS or OS utility for a negotiated 12 Gb/s link speed on each of the four lanes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.