We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Mini SAS cable with SFF-8644 and SFF-8088 connectors, 3.3ft long

Vszerda

Vszerda Mini SAS SFF-8644 to SFF-8088 Cable 6Gbps 3.3ft

SKU CH-M74Q-BP6JG

Connects Mini SAS HD SFF-8644 to SFF-8088 devices at 6 Gbps over 3.3 ft

  • TypeMini SAS
  • ColorSFF-8044 to SFF-8088
  • Length3.3
  • Connector Number4
  • Connector DetailSas
  • Terminal GenderMale-to-Female
  • 6Gbps per channel for high-speed data transfer
  • SFF-8644 to SFF-8088 connects HD Mini-SAS to Mini-SAS devices
  • 3ft twinaxial 8-pair cable with 100 Ohm impedance
  • SAS 2.1 and 3.0 specification compatible
  • Hot-pluggable design with certified 6.0 Gbps test compliance

Connector Bridge for SAS 2.1 and 3.0

This Vszerda cable bridges Mini SAS HD SFF-8644 and Mini SAS SFF-8088 ports for external server and storage links. It supports SAS 2.1 drive performance and remains fully compatible with both SAS 2.1 and SAS 3.0 interface specifications. The 3.3 ft length suits rack-to-rack or rack-to-enclosure runs in data centres and direct-attached storage setups.

Signal Integrity and Hot-Plug Ready

Twinaxial 8-pair construction with 100 Ohm impedance and AWG30 conductors keeps skew low at 6.0 Gbps per channel. The male-to-female terminals deliver a solid connection with strong EMI performance and allow hot-plug insertion without powering down. Each unit passes Serial Attached SCSI 6.0 Gbps certification before shipment.

Verify Port Types and Cable Reach

Confirm that your HBA, RAID controller or storage enclosure presents the exact SFF-8644 and SFF-8088 connectors this cable requires. Measure the physical path between devices to ensure the 3.3 ft span covers the route with slack for cable management. This cable carries SAS and SATA protocols only; it does not support other interfaces.

Highlights

  • 6Gbps per channel for high-speed data transfer
  • SFF-8644 to SFF-8088 connects HD Mini-SAS to Mini-SAS devices
  • 3ft twinaxial 8-pair cable with 100 Ohm impedance
  • SAS 2.1 and 3.0 specification compatible
  • Hot-pluggable design with certified 6.0 Gbps test compliance

Specifications

BrandHeretom
ModelHeretom Mini SAS 6Gbps
TypeMini SAS
ColorSFF-8044 to SFF-8088
Length3.3
Connector Number4
Connector DetailSas
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
SpecificationsMini SAS

Questions about this item

Will the SFF-8644 or SFF-8088 connectors need periodic replacement in a server rack?

The connectors are rated for hot-plug cycles and meet SAS 2.1 and 3.0 specifications; no scheduled replacement interval is defined by the manufacturer.

What limits sustained throughput on this 3.3 ft twinax link?

Each channel is specified at 6 Gbps with 100 Ohm impedance and AWG30 conductors, so the signalling rate is the first ceiling under continuous load.

Does the cable generate noticeable heat or EMI when run all day in a DAS array?

The twinaxial 8-pair design targets low skew and excellent EMI performance; the assembly draws no active power and stays passive during operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.