We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3.3FT Mini SAS SFF-8643 to SFF-8643 cable with 36-pin male connectors

Vszerda

Vszerda Mini SAS SFF-8643 to SFF-8643 cable 3.3FT 12Gb/s

SKU CH-E6S2-KNXJS

Internal SAS cable with 36-pin SFF-8643 connectors on both ends, 3.3 ft long, rated for 12 Gb/s

  • TypeSAS
  • ColorMini SAS 8643 to Mini SAS 8643
  • Length1
  • Connector Number36
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Male
  • 12 Gb/s data throughput with SAS 3.0 support
  • 36-pin high-density SFF-8643 connectors on both ends
  • 3 ft length fits standard chassis routing
  • 30 AWG conductors for reliable internal signalling
  • Male-to-male design links host and target directly

Internal SAS interconnect

This Vszerda cable links two SFF-8643 Mini SAS HD ports inside a chassis. It suits builders wiring RAID controllers, JBOD enclosures or backplanes that use the high-density connector. The male-to-male assembly arrives new and ready for internal routing.

Build integration

The 1.0 metre length reaches between adjacent drive cages or from a controller card to a backplane without excess slack. Thirty-six pins carry four lanes of SAS traffic through a 30 AWG black jacket. No shielding is fitted, so keep the run clear of noisy power cables.

Capacity and headroom

Rated for SAS 3.0 at 12 Gb/s per lane, the cable also supports SAS 2.1 at 6 Gb/s for older gear. It handles four simultaneous 12 Gb/s lanes, saturating typical SSD or HDD arrays. Builds needing external ports or higher lane counts will need different cabling.

Highlights

  • 12 Gb/s data throughput with SAS 3.0 support
  • 36-pin high-density SFF-8643 connectors on both ends
  • 3 ft length fits standard chassis routing
  • 30 AWG conductors for reliable internal signalling
  • Male-to-male design links host and target directly

Specifications

BrandVszerda
TypeSAS
ColorMini SAS 8643 to Mini SAS 8643
Length1
Connector Number36
Connector DetailMini Sas
Terminal GenderMale-to-Male
Speed12 gigabytes_per_second
SpecificationsSAS
ShieldingNo
FeaturesNo

Questions about this item

What maximum data rate does the 12Gb/s SFF-8643 cable sustain under continuous load?

The cable is rated for 12Gb/s SAS 3.0 and remains compliant with the SAS 2.1 6Gb/s specification for backward compatibility.

Does the 30AWG unshielded cable generate noticeable heat or signal degradation during all-day operation?

The 30AWG construction carries the 12Gb/s signal without active cooling; heat rise is minimal inside a typical chassis airflow.

Which host-side connector must my backplane or HBA already provide for this male-to-male SFF-8643 assembly?

The cable requires a female SFF-8643 port on both the controller and the drive backplane to complete the 36-pin link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.