We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8643 male to four SATA male connectors, 90-degree angled ends, .5 metre length

Vszerda

Vszerda Mini SAS SFF-8643 to 4x SATA Cable .5m 12Gbps 90°

SKU CH-BFVE-JKET1

Connects a Mini SAS SFF-8643 host port to four SATA drives at 12 Gbps with a 90-degree angle for tight spaces

  • TypeComponent
  • Terminal GenderMale-to-Male
  • Speed12 gigabits_per_second
  • ConductorCopper
  • FeaturesHigh Speed
  • Connects controller to four drives
  • 12 Gbps throughput for fast storage access
  • 90° angled connector eases tight-space routing
  • .5 m length keeps runs short and tidy
  • Copper conductors maintain signal integrity

SFF-8643 to 4x SATA Cable .5m 12Gbps

This Vszerda cable connects a host Mini SAS SFF-8643 port on a motherboard or RAID controller to four SATA hard drives. The 0.5 metre length and 12 Gbps rating suit internal server storage builds. Copper conductors and a 90-degree connector angle assist routing in tight chassis. The male-to-male design links host and target devices directly.

For RAID controller to drive links not backplane use

Installers wiring a controller card to discrete SATA drives in a server will find the pin-out and angle convenient. The cable is not wired for backplane-to-drive connections, so builders attaching drives to a backplane SFF-8643 port must select a different assembly. The fixed 0.5 metre reach also limits use in larger enclosures where longer runs are required.

Host-side SFF-8643 port requirement decides fit

The single specification that determines compatibility is the presence of a host Mini SAS SFF-8643 connector on the motherboard or RAID controller. If the system only offers a backplane SFF-8643 port, the cable will not function. Verify the host port type before purchase.

Highlights

  • Connects controller to four drives
  • 12 Gbps throughput for fast storage access
  • 90° angled connector eases tight-space routing
  • .5 m length keeps runs short and tidy
  • Copper conductors maintain signal integrity

Specifications

BrandHeretom
TypeComponent
Terminal GenderMale-to-Male
Speed12 gigabits_per_second
ConductorCopper
FeaturesHigh Speed

Questions about this item

How can I confirm the 12 Gbps link is active after connecting the SFF-8643 to my RAID controller?

Check the controller BIOS or OS disk utility for a negotiated 12 Gbps link on each of the four SATA drives and run a short sequential read test to verify sustained throughput.

What connectors and cable length are included, and what must I supply separately?

The box contains one .5 m Mini SAS SFF-8643 male to four right-angle SATA male cables; you must provide the RAID controller or motherboard with an SFF-8643 port and the SATA hard drives.

Which cable version should I choose for a 12 Gbps internal RAID array in a tight chassis?

Select this .5 m 90-degree SFF-8643 to 4x SATA cable; its right-angle connectors fit confined spaces and the copper conductors support the 12 Gbps SAS specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.