We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Mini SAS SFF-8643 to four SATA breakout cable 1.64ft

Vszerda

Vszerda Mini SAS SFF-8643 to 4x SATA cable 1.64ft

SKU CH-DH6P-54EAT

Connects a Mini SAS SFF-8643 host port to four SATA drives with labelled breakout ends and locking latches

  • Connect RAID controller to four SATA drives
  • 12 Gb raw cable supports high-throughput storage
  • Labeled SATA connectors simplify cable management
  • Locking latches on Mini SAS ensure stable link
  • 64 ft length fits typical chassis layouts

Vszerda Mini SAS SFF-8643 breakout cable

This Vszerda cable connects a host Mini SAS SFF-8643 port on a motherboard or RAID controller to four SATA hard drives. The 1.64ft assembly uses UL-listed 12Gb raw SAS cable with labelled breakouts and locking connector latches for a stable link. It is designed for internal storage expansion where the controller provides the SFF-8643 host interface.

Replaces older 6Gb mini SAS interconnects

The SFF-8643 connector uses less PCB space and enables higher port density than legacy 6Gb mini SAS plugs. Hybrid cable designs allow a smooth transition path toward 15Gb signalling when both controller and drives support it. The upgrade is worthwhile when your current cabling limits port count or when you are moving to a controller that only offers SFF-8643 host ports.

Verify host port and drive compatibility

Confirm that your motherboard or RAID controller presents an SFF-8643 host port; the cable will not function if the SFF-8643 connector sits on a backplane. The four SATA targets accept SATA I, II or III drives, and actual transfer speed depends on the capabilities of the controller and the attached drives. No reversed SATA-host configuration is supported.

Highlights

  • Connect RAID controller to four SATA drives
  • 12 Gb raw cable supports high-throughput storage
  • Labeled SATA connectors simplify cable management
  • Locking latches on Mini SAS ensure stable link
  • 64 ft length fits typical chassis layouts

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the SFF-8643 host connector need on the motherboard or RAID controller?

The SFF-8643 host connector is a compact Mini SAS HD design that uses less PCB real estate, allowing higher port density on the controller or motherboard.

Which step do builders often miss when connecting the four SATA targets?

Each of the four 10-pin SATA breakout leads is labelled; match the labels to the correct drives before seating the locking latches to avoid crossed connections.

When should the UL-listed 12 Gb raw SAS cable assembly be replaced?

Replace the cable if the locking latches no longer hold securely, if any SATA connector shows bent pins, or if the controller is upgraded beyond 12 Gb and the link becomes unreliable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.