We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cable with Mini SAS SFF-8643 male connector and four right-angle SATA female ports

Vszerda

Vszerda Mini SAS SFF-8643 to 4x SATA Angle Cable 0.5m

SKU CH-WQ51-52AWQ

Connects a Mini SAS SFF-8643 controller to four SATA drives with a 90-degree angle for tight spaces

  • Connects RAID controller to four SATA drives via SFF-8643
  • 90-degree SATA ends ease routing in tight chassis
  • Supports 12 Gb/s SAS throughput for fast data access
  • 5 m length keeps signal path short and tidy
  • 30 AWG conductors balance flexibility with reliable connectivity

Mini SAS SFF-8643 to 4× SATA adapter

This cable connects a host Mini SAS SFF-8643 port on a motherboard or RAID controller to four SATA hard drives. It is built for internal storage expansion in servers or workstations that use SAS controllers. The 0.5 metre length suits compact chassis layouts. Buyers who need to connect drives to a backplane SFF-8643 port cannot use this cable.

Angled 90-degree connector for tight spaces

The 90-degree SATA ends improve cable routing where clearance is limited behind drive cages. A 30AWG cable carries 12 Gb SAS signals while keeping the bundle flexible. The latch on the SFF-8643 plug secures the link during vibration or maintenance. No active cooling or power draw is introduced by the passive assembly.

Controller-side SFF-8643 host interface

The single specification that decides fitment is the SFF-8643 host connector on the controller side. If the system presents SFF-8643 on a backplane instead of a controller, this cable will not function. Verify the port role before purchase.

Highlights

  • Connects RAID controller to four SATA drives via SFF-8643
  • 90-degree SATA ends ease routing in tight chassis
  • Supports 12 Gb/s SAS throughput for fast data access
  • 5 m length keeps signal path short and tidy
  • 30 AWG conductors balance flexibility with reliable connectivity

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SFF-8643 to 4x SATA angle cable and what step is often missed?

Connect the SFF-8643 male end to the controller or motherboard port, not a backplane, then attach the four angled SATA connectors to the drives; the latch must click to secure the link.

What maintenance or replacement will this 0.5m cable need over time?

The 30AWG wires and 90-degree SATA ends can fatigue if repeatedly bent; inspect for cracked insulation or loose pins and replace the cable if signal errors appear.

What limit appears first when this Mini SAS cable runs at sustained 12Gb speeds?

The 30AWG gauge and 0.5 metre length restrict signal integrity at 12Gb, so bit-error rate typically rises before thermal or connector-cycle limits are reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.