We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with one SFF-8643 plug splitting to four SFF-8482 connectors

Vszerda

Vszerda Mini SAS SFF-8643 to 4 SFF-8482 29Pin 6Gbps Cable 0.5M

SKU CH-N2CF-4NXEJ

Connects one SFF-8643 host port to four 29-pin SFF-8482 drives at 6 Gbps over a 0.5 m cable

  • TypeMini-SAS
  • ColorSFF-8643 - 4 SFF-8482 Cable
  • Length50
  • Connector Number116
  • Connector DetailSff-8643
  • Terminal GenderMale
  • Connect four drives with one 50 cm cable
  • 6 Gbps bandwidth meets SAS 2.1 standard
  • SFF-8643 host links to four SFF-8482 targets
  • Supports both SAS and SATA hard disks
  • Not compatible with PCI-E SFF-8643 controllers

Server storage cable

This 0.5 metre cable links a single Mini SAS HD SFF-8643 host port to four SAS 29-pin SFF-8482 drive connectors. It lets administrators attach up to four SAS or SATA disks to a compatible RAID or HBA controller in dense server chassis.

Sustained 6 Gbps throughput

The assembly follows the SAS 2.1 specification and maintains 6 gigabits per second across each of the four lanes during continuous read or write workloads. Shielded 1-to-4 construction preserves signal integrity over the full length without the errors seen in cheaper unshielded looms.

Passive thermal profile

As a copper cable it draws no power and adds no acoustic noise to the rack. The low-profile connectors fit tight backplane spacing while the 50 centimetre reach keeps cable management tidy in 1U and 2U enclosures.

Highlights

  • Connect four drives with one 50 cm cable
  • 6 Gbps bandwidth meets SAS 2.1 standard
  • SFF-8643 host links to four SFF-8482 targets
  • Supports both SAS and SATA hard disks
  • Not compatible with PCI-E SFF-8643 controllers

Specifications

Brandchenyang
TypeMini-SAS
ColorSFF-8643 - 4 SFF-8482 Cable
Length50
Connector Number116
Connector DetailSff-8643
Terminal GenderMale
Speed6 gigabits_per_second
SpecificationsMini-SAS
Shielding1-to-4
Features1-to-4

Questions about this item

Does the 0.5 m length add noticeable signal loss or heat when the cable runs all day at 6 Gbps?

The copper cable meets the SAS 2.1 specification for 6 Gbps, so a 0.5 m run stays within the standard’s signal-integrity and thermal limits for continuous operation.

What controller port must my server or RAID card already provide for the SFF-8643 host connector to plug in?

You need a Mini SAS HD SFF-8643 host port; the cable will not work with a PCIe SFF-8643 controller.

Can I attach my older 29-pin SAS or SATA drives directly to the four SFF-8482 device ends?

Yes, each of the four SFF-8482 connectors accepts a standard 29-pin SAS or SATA drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.