We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 80 cm Mini SAS SFF-8087 cable with left-angled 90° connectors on both ends

Vszerda

Vszerda Mini SAS SFF-8087 to SFF-8087 36-pin RAID cable 80cm left angled 90°

SKU CH-EYXS-ABC7S

Connects SAS or SATA controllers to backplanes using ultra-slim left-angled 90° Mini SAS 36-pin SFF-8087 connectors on an 80 cm cable

  • TypeRaid 36Pin
  • ColorSFF-8087 - SFF-8087 0.8M
  • Length2
  • Connector Number36
  • Connector DetailMini Sas Sff-8087
  • Terminal GenderMale-to-Male
  • Ultra-slim 90° left-angled connector eases tight chassis routing
  • 80 cm length suits standard server backplane spacing
  • 36-pin SFF-8087 male-to-male supports SAS and SATA drives
  • Passive locking latches keep connection secure under vibration
  • Flat ribbon design improves airflow inside dense enclosures

Vszerda SFF-8087 RAID Cable 80cm

This Vszerda cable connects a SAS controller to a backplane using 36-pin SFF-8087 connectors at both ends. The 80cm ultra-slim flat design with left-angled 90° plugs fits tight server and workstation chassis. It supports SAS and SATA bandwidths for high-throughput storage arrays.

Check controller and backplane ports

Verify that both your RAID controller and drive backplane present SFF-8087 36-pin receptacles before ordering. The cable is male-to-male and intended for internal controller-to-backplane links only. Ensure 80cm reach suits your chassis layout and that the left-angled orientation clears adjacent components.

Passive cable thermals and power

As a passive copper assembly the cable adds no active heat or noise to the system. Power draw is limited to the signalling current supplied by the controller ports. The slim flat profile promotes airflow inside dense enclosures without obstructing nearby cooling paths.

Highlights

  • Ultra-slim 90° left-angled connector eases tight chassis routing
  • 80 cm length suits standard server backplane spacing
  • 36-pin SFF-8087 male-to-male supports SAS and SATA drives
  • Passive locking latches keep connection secure under vibration
  • Flat ribbon design improves airflow inside dense enclosures

Specifications

Brandchenyang
TypeRaid 36Pin
ColorSFF-8087 - SFF-8087 0.8M
Length2
Connector Number36
Connector DetailMini Sas Sff-8087
Terminal GenderMale-to-Male
SpecificationsRaid 36Pin
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

What comes in the box and do I need anything else?

The box contains one 80 cm Mini SAS SFF-8087 to SFF-8087 36-pin RAID cable with left-angled 90° connectors; no additional parts are required for a standard controller-to-backplane connection.

Which length should I choose for my build?

This cable is 80 cm long; choose it when the distance between your SAS controller and backplane fits within that reach, otherwise select a different length.

What does the 36-pin SFF-8087 interface actually deliver in a real system?

The 36-pin SFF-8087 connectors carry four SAS or SATA lanes, supporting Generation I and II bandwidths for controller-to-backplane data transfer with positive locking.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.