We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda Mini SAS SFF-8087 to 4xSATA Cable 0.5m 1.6ft

SKU CH-D2SN-WVMEJ

Connects a Mini SAS SFF-8087 port to four SATA drives with a .5m (1.6ft) internal breakout cable

  • TypeInternal Mini SAS HD Cable
  • ColorBlack
  • Length0.5
  • Connector DetailSff-8087 to 4x Sata
  • FeaturesData Transfer
  • Connect four SATA drives from one Mini SAS 8087 port
  • Secure shrapnel clips keep each SATA link firmly seated
  • Half-metre length fits tight server chassis without slack
  • Forward breakout design routes cables cleanly toward drive bays
  • Broad RAID-controller compatibility simplifies storage upgrades

Mini SAS SFF-8087 breakout cable

This internal cable connects a single Mini SAS SFF-8087 port on a RAID controller to four SATA drives. It suits builders adding multiple hard drives to a server or workstation backplane. The .5 metre length keeps cable routing tidy inside compact chassis.

SATA throughput ceiling per drive

Each SATA connector is limited by the SATA interface maximum, so sustained transfer rates cannot exceed that ceiling regardless of the SAS link speed. The breakout topology shares the upstream SAS bandwidth across four drives, which can become a bottleneck under heavy simultaneous loads.

Shrapnel latches and short reach

Moulded shrapnel latches on the SATA plugs resist accidental unplugging during drive swaps or vibration. The short .5 metre run reduces clutter but demands that the controller and drive cages sit close together; it will not span full-tower distances.

Highlights

  • Connect four SATA drives from one Mini SAS 8087 port
  • Secure shrapnel clips keep each SATA link firmly seated
  • Half-metre length fits tight server chassis without slack
  • Forward breakout design routes cables cleanly toward drive bays
  • Broad RAID-controller compatibility simplifies storage upgrades

Specifications

Brandipolex
TypeInternal Mini SAS HD Cable
ColorBlack
Length0.5
Connector DetailSff-8087 to 4x Sata
FeaturesData Transfer

Questions about this item

Should I pick the .5 m or the 1.6 ft version for my RAID controller?

Both figures describe the same cable length; choose the unit you prefer — .5 m equals 1.6 ft.

What does the SFF-8087 connector actually deliver inside my server?

The SFF-8087 plug carries four SAS lanes that break out to four SATA drives, letting a RAID controller address each drive independently.

Does the SATA breakout limit speed to the SATA 6 Gb/s ceiling?

Yes — each of the four SATA connectors is capped at the SATA 6 Gb/s interface rate, regardless of the SAS host capability.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.