We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 male to four SATA female breakout cable, 1 metre

Vszerda

Vszerda Mini SAS SFF-8087 to 4xSATA Breakout Cable 1m

SKU CH-8N8M-QCC7Q

Connects a Mini SAS SFF-8087 host port to four SATA drives at 6 Gbps using 30 AWG oxygen-free copper with triple-layer shielding

  • TypeInternal Mini SAS HD Cable
  • ColorSFF-8087 to 4SATA
  • Length1
  • Connector DetailSff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • 6 Gbps bandwidth for fast HDD/SSD transfers
  • SFF-8087 host to four SATA drives connectivity
  • Forward breakout design suits server backplanes
  • 30 AWG oxygen-free copper with triple shielding
  • 1 m length with secure latching connector

Breakout Cable for RAID and HBA

This Vszerda cable converts a Mini SAS SFF-8087 host port into four SATA connections for HDDs or SSDs. It targets administrators wiring RAID controllers, HBAs or enterprise backplanes in servers such as Dell PowerEdge and HP ProLiant systems.

Latching Connector and Crossover Wiring

The SFF-8087 end uses a secure latching design that supports hot-swap drive bays and requires no tools to seat. Crossover wiring is factory-set for host-to-target signal flow, so reversing the cable will break the link; verify port orientation before locking it in.

Shielded 30 AWG Cores at 6 Gbps

Oxygen-free copper conductors and triple-layer braided shielding maintain 100 Ohm impedance across the 1 m run. The assembly is rated for sustained 6 Gbps SATA III throughput, keeping RAID arrays and backup jobs stable under continuous load.

Highlights

  • 6 Gbps bandwidth for fast HDD/SSD transfers
  • SFF-8087 host to four SATA drives connectivity
  • Forward breakout design suits server backplanes
  • 30 AWG oxygen-free copper with triple shielding
  • 1 m length with secure latching connector

Specifications

Brandipolex
ModelCAB-8087/4SATA-P1M (BT)
TypeInternal Mini SAS HD Cable
ColorSFF-8087 to 4SATA
Length1
Connector DetailSff-8087 to 4x Sata
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
Conductoroxygen-free copper
FeaturesData Transfer

Questions about this item

How can I confirm the Vszerda Mini SAS SFF-8087 cable is working correctly after connecting it to my RAID controller?

The SFF-8087 male connector latches securely to the controller port; once seated, the RAID BIOS or OS should detect all four attached SATA drives at 6Gbps link speed without errors.

What comes in the package and what must I source separately?

The box contains one Mini SAS SFF-8087 male to 4x SATA female breakout cable; you must provide the RAID controller or HBA with an SFF-8087 port and up to four SATA drives.

Which cable version should I choose for a server backplane that needs a forward breakout from the controller?

This model uses crossover wiring with the SFF-8087 male as host and four SATA females as targets, purpose-built for forward breakout from controller to backplane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.