We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 0.5 m Mini SAS SFF-8087 male to four SATA female breakout cable with braided shielding

Vszerda

Vszerda Mini SAS SFF-8087 to 4x SATA Breakout Cable 0.5m

SKU CH-2RCB-SJZ8T

Connects a Mini SAS SFF-8087 controller to four SATA drives at 6 Gbps over 0.5 m

  • TypeSATA
  • ColorSFF-8087 to 4SATA
  • Length0.5
  • Connector DetailSff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • Connect at 6 Gbps with SATA III drives
  • Link Mini SAS SFF-8087 host to four SATA targets
  • Forward breakout design routes signal from controller to drives
  • 30 AWG oxygen-free copper with triple braided shielding
  • Hot-swap ready latching connector on 0.5 m cable

Host-to-Drive Breakout Cable

This 0.5 m cable bridges a Mini SAS SFF-8087 host port on a RAID controller or HBA to four SATA drives. It targets server builders and storage administrators who need direct backplane connectivity inside a chassis. The forward breakout design carries signals from the controller to the drives without a reverse path.

Sustained 6 Gbps Throughput

Rated at 6 Gbps per lane, the assembly maintains SATA III bandwidth across all four channels during continuous RAID rebuilds or backup streams. Triple-layer braided shielding and 100 Ohm impedance control suppress crosstalk in dense drive bays. Gold-plated contacts resist oxidation through repeated hot-swap cycles.

Enterprise-Grade Construction

30 AWG oxygen-free copper cores and an 8-pair wire layout deliver mechanical durability for rack installations. The 36-pin SFF-8087 male connector latches securely to the controller while four SATA females plug directly into drive backplanes. Crossover wiring matches standard server pin-outs and RoHS compliance meets data-centre procurement rules.

Highlights

  • Connect at 6 Gbps with SATA III drives
  • Link Mini SAS SFF-8087 host to four SATA targets
  • Forward breakout design routes signal from controller to drives
  • 30 AWG oxygen-free copper with triple braided shielding
  • Hot-swap ready latching connector on 0.5 m cable

Specifications

Brandipolex
ModelCAB-8087/4SATA-P0.5M (BT)
TypeSATA
ColorSFF-8087 to 4SATA
Length0.5
Connector DetailSff-8087 to 4x Sata
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
ConductorComposite
FeaturesData Transfer

Questions about this item

Does the 0.5 m cable generate noticeable heat or draw extra power when drives run continuously?

The cable is passive copper with 30 AWG conductors and 100 Ohm impedance, so it adds no active heat or power draw during all-day operation.

What host-side connector must my controller or HBA provide for this breakout to plug in?

The host end requires a Mini SAS SFF-8087 36-pin male port, commonly found on RAID controllers and HBAs such as LSI or Dell PERC cards.

Will the 3.0 Gbps-rated cable limit my older 3 Gbps SATA drives in a mixed array?

The assembly supports up to 6 Gbps SATA III, so legacy 3 Gbps drives simply run at their native speed without bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.