We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Mini SAS SFF-8087 male to four SATA female breakout cable 3.3FT

Vszerda

Vszerda Mini SAS SFF-8087 to 4 SATA cable 3.3FT Red breakout

SKU CH-FTD4-NRTBF

Connects a Mini SAS SFF-8087 controller to four SATA drives with a 3.3 ft red cable supporting 12.0 Gbps total bandwidth

  • Connects one controller to four drives using a single Mini SAS SFF-8087 36-pin male plug and four SATA 7-pin female sockets
  • Delivers up to 12.0 Gbps total bandwidth with 3 Gbps per lane for high-throughput storage access
  • 3 FT (1.0 m) red cable provides clear routing and easy identification inside the chassis
  • Multi-lane breakout design simplifies cabling from a host controller to multiple target HDDs or backplanes
  • Latching Mini SAS connector ensures a secure link that resists accidental disconnection during operation

Connection and length

This is a new Vszerda Mini SAS SFF-8087 to 4 SATA breakout cable measuring 3.3FT or 1.0 metre. A 36-pin male connector attaches to a controller while four SATA 7-pin female connectors link target hard drives. The assembly supports a total data transfer rate of 12.0 Gbps across the four lanes.

Suitable builds and limits

The cable suits builders who need to connect a Mini SAS SFF-8087 host port to up to four SATA drives inside a chassis. It will not suit installations that require an external Mini SAS connector, a straight SATA-to-SATA link, or a longer reach than 3.3FT.

Deciding specification

The single specification that decides fit is the 36-pin Mini SAS SFF-8087 male connector on the controller side; the host must present this exact interface for the cable to work.

Highlights

  • Connects one controller to four drives using a single Mini SAS SFF-8087 36-pin male plug and four SATA 7-pin female sockets
  • Delivers up to 12.0 Gbps total bandwidth with 3 Gbps per lane for high-throughput storage access
  • 3 FT (1.0 m) red cable provides clear routing and easy identification inside the chassis
  • Multi-lane breakout design simplifies cabling from a host controller to multiple target HDDs or backplanes
  • Latching Mini SAS connector ensures a secure link that resists accidental disconnection during operation

Specifications

No published specifications for this item yet.

Questions about this item

Will the SFF-8087 connector fit my existing RAID controller?

The cable uses a Mini SAS SFF-8087 36-pin male connector with latch, matching standard controller ports.

How can I verify the 12.0 Gbps link is active after installation?

Check controller BIOS or OS disk utility for negotiated 12 Gbps per lane across all four SATA drives.

Does the 3.3FT red cable include the four SATA data connectors or must I buy them separately?

The assembly ships complete with one SFF-8087 male end and four SATA 7-pin female ends; no extra parts needed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.